[LinuxFocus-icon]
Home  |  Map  |  Index  |  Search

News | Archives | Links | About LF
This document is available in: English  Castellano  Deutsch  Francais  Italiano  Nederlands  Portugues  Russian  Turkce  

convert to palmConvert to GutenPalm
or to PalmDoc

[Photo of the Author]
by Georges Tarbouriech

About the author:

Georges is a long time Unix user. He thinks computer security is one of main challenges of this century.


Content:

 

Psionic Portsentry 1.1, the defender of the ports

[illustration]

Abstract:

Psionic portsentry is part of the Abacus Project suite of tools (beside portsentry, the suite offers logcheck and hostsentry). It's an IDS (Intrusion Detection System) dedicated to portscan detection and active defense. It works on many Unix flavors including Mac OS X. The main feature of an IDS is to inform the sysadmin about intrusion attempts. Portsentry goes further since it can react on an attack. The latest version (1.1) of this great tool is available from http://www.psionic.com, and by the way, version 1.0 is now part of some main Linux distributions (Debian, RedHat...).



 

Why use portsentry ?

During the last decade, networking grew up at an incredible speed. The goal was to allow communication between machines using different OSes. Thus, proprietary networking systems were slowly replaced with TCP/IP. Internet did the rest ! Today, most networking relies on TCP/IP and TCP/IP relies on ports. To make it short, ports are attached to programs (clients or servers). The server listens till a client contacts it to establish a connection. The services (the programs above mentioned) are mapped to a specific port. On Unix systems, this mapping scheme is found in the /etc/services file. That is, everyone knows which port is dedicated to which service. If everyone knows, crackers know even better ! If we consider a port as a door, when a port is open (listening), it's like an unlocked door. And how do you get into a house ? Usually through the door (unless you prefer the window, it's up to you !). So do the black hats to get into your computer...
The first thing you can do to reduce the risk is to close as many ports as possible, that is to stop services. The less the better. But you hardly can close every port on a networked machine : it wouldn't communicate anymore, that would be a pity !
How to limit the number of active services or how to close the ports is beyond the scope of this article. You'll find a lot of literature on the subject, for instance going to the Linux Documentation Project or searching through LinuxFocus issues (for example, Bastille Linux or Security tools). So for the different ways to protect a machine, a network. On Linux, consider Bastille Linux as a must have.
And this is where portsentry comes. Portsentry can monitor ports and is able to block them if you ask it to do so. It provides you with different operating modes, some of them being specific to some OSes. As a matter of fact, OSes means Linux.
Portsentry is able to benefit from packet filtering provided with ipfwadm, ipchains or iptables according to the Linux kernel you have. This is true for other Unix flavors using different tools (back on this later). There we are : portsentry greatest feature probably is "auto-blocking".
How does it manage that ? Here we go !

 

How to install portsentry ?

Portsentry comes as a very small tarball. After unpacking the archive, you get source code and various configuration and README files. Obviously, all that stuff is recommended reading. Since we're talking about security, don't forget to download the PGP files (signature and key).
Installing portsentry is obvious : make (your system) and make install. But before installation, you should prepare it. That is, you should read the documentation, change the portsentry.conf file to suit your needs and check the Makefile as well as the portsentry_config.h file.
For portsentry to be the most efficient, you need at least TCPWrappers. At least, because it would be much better to use it in conjunction with a packet filtering tool. Of course, if you use Linux, you already have everything you need. What about other Unices ?
Since we tested portsentry on different platforms, let's talk about the requirements.
On MAC OS X, it's like for Linux : everything is there. You have TCPWrappers, and ipfw (the BSD version). So just typing "make osx" will do the trick.
On Solaris 2.6 (SPARC), you don't have TCPWrappers. You can get it from ftp://ftp.porcupine.org/pub/security. You can also try IPFilter available from ftp://coombs.anu.edu.au/pub/net/ip-filter/ip-fil3.4.9.tar.gz (but only if you have the Solaris compiler !!!).
On Irix 6.5, you don't have TCPWrappers either. You can get it as a package from http://freeware.sgi.com/index-by-alpha.html For packet filtering you have ipfilterd, coming with Irix but not installed by default.
Last, but not least, unless you find a working vsnprintf(), you won't be able to install portsentry on NeXTSTEP... and I didn't find one !
However, once again, you should configure portsentry before installing it. Well, it's up to you, but it should be better to understand its philosophy before everything else... but it's just a matter of opinion !

 

How does portsentry work ?

Fine, thank you !
More seriously, portsentry relies on configuration files. The most important is the portsentry.conf file. This is where you tell portsentry how to react against adversity.
Before dealing with that file, you need to know what the different modes of operations are and what they do.
Portsentry can use six different modes, according to the option you give at startup.
- The first one is "-tcp" and it is the basic mode. With this option, portsentry will bind the TCP ports found in the config file in the "port configuration" section. It can bind till the limit of 64 ports.
- The second one is "-udp" and does the same as the previous one for UDP ports.
- The third is "-stcp", the "s" meaning stealth. This option and the next ones are only available for Linux. With the "-stcp" option, portsentry uses a socket to monitor incoming packets, that is the ports are not binding to anything.
- The fourth is "-sudp" and does the same as the previous one for UDP ports.
- The fifth and sixth are "-atcp" and "-audp". These are the most effective options ("a" stands for advanced). Using these options, portsentry makes a list of the listening ports, TCP and UDP, if you select both, and blocks the host connecting to these ports, unless this host is present in the portsentry.ignore file.
This is much better explained in the README files coming with portsentry. Accordingly, we won't reinvent the wheel, trying to rewrite the documentation. These README files are compulsory reading (as usual, let's be a bit fascist !).

How does portsentry react ?

Obviously, portsentry can generate logs. If you are the kind of sysadmin not reading the logs (shame on you !), you can use logcheck in conjunction with portsentry. That way, portsentry sends a mail to inform you about an intrusion attempt.
It can write the target host into the /etc/hosts.deny file, for use with TCPWrappers.
The local host is able to route the network traffic to a dead host.
Last, the local host can drop the packets through the packet filtering local tool.
Now you know a bit better about portsentry philosophy, you can start writing your portsentry.conf file.
- The first section of the config file concerns the ports. There, you can choose the ports to bind. Remember, this is ignored when using the advanced modes for Linux. Careful with the ports you want to bind (don't bind port 6000 if you use X, for instance).
- The next section is for advanced detection options. The default is to monitor every port below 1024, either for TCP or UDP. There, you can also exclude the ports you wish to ignore. This is quite important to avoid false alarms, and so huge logging, especially if you have Windos machines in your network. For instance, mind the port 111 if portmap is used and the hosts are not present in the portsentry.ignore file. Sure, it would be crazy, since portmap means RPC servers like NFS, but you've been warned. That is, NFS is not that secure on Unix machines so don't we talk about Windos machines.
Here comes the usual off-topic section : when I write "Windos", it is not a typo : it is just to insist on the fact Windows is a desktop environment on top of DOS (D for dirty ?)... and it makes one less character to type (how lazy I am !). Sorry for the digression.
- The configuration files section concerns the files used by portsentry for history purpose or to define the hosts to ignore. If you perform a default install, don't change this.
- The miscellaneous config section allows to turn on or off DNS lookups.
- The response options section is the heart of the configuration. This is where you define how portsentry will react.
First, are the ignore options. You can choose to block the scans, not to block them or run an external command.
Next, in the dropping routes section, you tell portsentry how to drop the route or how to benefit from the packet filtering tool used on your machine. There are a lot of examples for many platforms. Select the one (and only one !) suiting your needs.
- The TCPWrappers section indicates if you want to write into the /etc/hosts.deny file.
- The external commands section allows to define a command to run when an host connects.
- The scan trigger value section allows to define the reaction time. The default value of "0" is the most immediate since it sends an alarm at first connection attempt.
- The last section is to display a banner in case of intrusion attempt. It doesn't work with stealth modes.
When finished with that part, you're almost done. Again to avoid false alarms and huge logging, check the portsentry.ignore file. You can add there your local network address with netmask bits, or the IP address of a few machines.
That's it ! You can now "make yoursystem" and "make install". The install script does the whole job since it gives restricted permissions to the directory and the files. Now, enough to run portsentry with the options of your choice. Check the logs to see what happened. If everything went well, portsentry has started and has hardened the host security.

 

What happens then ?

Using tools such as nmap, you may now simulate a port scan of your newly secured host. (More on nmap there). This is the answer you can get :

portsentry is
running on the scanned host

That is, this machine doesn't give much information to the cracker !
Usually, this attempt should have provided you with the OS version and the open ports of the scanned host. This kind of information is quite useful for a cracker since he knows better where and how to attack. With portsentry running with a scan trigger value of 0 in advanced mode, blocking is immediate. Running with a value of 1 in normal mode, the attacker would have got a list of open ports and probably the OS type running on the machine. But then, trying to connect to a known open port would fail. Portsentry has blocked the port after first attempt. Simple but quite effective !
That is, if you only use TCPWrappers, the attacker IP address has been written into the /etc/hosts.deny file. If you decided to drop the route redirecting it to a dead host, portsentry is still efficient but doesn't fully prevent from UDP attacks.
If you use a packet filtering tool, the attacked host drops the packets coming from the attacker through this tool.
Of course, this is the best way to benefit from the full power of portsentry.
Once again, the advanced mode on Linux is the ideal one. This doesn't mean portsentry is not as good on other OSes, it's just a bit less "performing"... well, not really !
To understand better, check the logs following different intrusion attempts to different OSes running portsentry in different modes. That says all !
According to the modes used, the logs will provide some false alarms. To improve the quality of the information, you'll have to work on the config file. After some testing, you should get exactly what you wish.

 

Can you live without portsentry ?

Definitely NOT ! There are a lot of IDS, free or not. Most of them are quite good. Let's mention the well known snort, available from http://www.snort.org.
Usually, those IDSes are passive ones. That is, they are used to inform you about intrusion. That's what they have been made for. For instance, snort is quite sophisticated, since it relies on rules scripts, thus allowing you to write your own. Snort website also provides a rules database. And, by the way, if you aren't afraid of huge logs, you can even run both portsentry and snort. It isn't that silly !
However, the strength of portsentry is that it is an active IDS. The way it can react is really breathtaking. Combining it with a packet filtering tool, makes it the mandatory tool. We could ask the question : is portsentry the complement of packet filter or is packet filter the complement of portsentry ?
Anyway, there's a lot more we could say about portsentry. For instance, you must be very careful with advanded mode UDP scan detection. Do read the doc (again !) to understand the problems related to UDP. Solaris may cause some problems as well, since it uses very high ports in the 32700 range (either TCP or UDP). But, this article is only an overview and in no way a complete review of this great piece of software.
Computer security is a concern, and not only for sysadmin. The incredible growth of the Internet makes things worse. That is, the danger of intrusion is everyday bigger. The free software community provides us with great tools : portsentry is one of them. Don't leave them aside ! But, remember, these tools only reduce the risk and in no way provides you with a 100% secure system. This is another reason to investigate the security tools area.
Last, but not least, people at Psionic are working on a commercial product and tell us "we won't be disappointed". Wait and see, then !
In the meantime, go and get portsentry 1.1, you won't be disappointed either. People at Psionic do a great job. By the way, hostsentry is also worth testing... and using.
We are living in a great time, aren't we ?

 

References

The following websites are absolute references when security is concerned. Furthermore, they can send you to some more websites, those last sending you to some more websites... You know, the Russian dolls ? The only trouble if you want to read the whole stuff is that you won't live long time enough !!!
http://www.linuxsecurity.com
http://www.sans.org
http://www.infosyssec.org
http://www.securityfocus.com
http://www.cs.purdue.edu/coast/hotlist/

 

Talkback form for this article

Every article has its own talkback page. On this page you can submit a comment or look at comments from other readers:
 talkback page 

Webpages maintained by the LinuxFocus Editor team
© Georges Tarbouriech, FDL
LinuxFocus.org

Click here to report a fault or send a comment to LinuxFocus

2001-08-21, generated by lfparser version 2.17

mirror server hosted at Truenetwork, Russian Federation.