Internet Engineering Task Force (IETF) V. Shankarkumar
Request for Comments: 8173 L. Montini
Category: Standards Track Cisco Systems
ISSN: 2070-1721 T. Frost
Calnex Solutions Ltd.
G. Dowd
Microsemi
June 2017
Precision Time Protocol Version 2 (PTPv2)
Management Information Base
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in internets based on TCP
or IP. In particular, it defines objects for managing networks using
the Precision Time Protocol (PTP), specified in IEEE Std. 1588-2008.
This memo specifies a MIB module in a manner that is both compliant
to the Structure of Management Information version 2 (SMIv2) and
semantically identical to the peer SMIv1 definitions.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc8173.
Shankarkumar, et al. Standards Track [Page 1]
RFC 8173 PTPv2 MIB June 2017 Copyright Notice Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction ....................................................3 1.1. Relationship to Other Profiles and MIBs ....................3 2. The SNMP Management Framework ...................................4 3. Overview ........................................................4 4. PTP MIB Definition ..............................................5 5. Security Considerations ........................................59 6. IANA Considerations ............................................61 7. References .....................................................62 7.1. Normative References ......................................62 7.2. Informative References ....................................63 Acknowledgements ..................................................63 Author's Addresses ................................................64 Shankarkumar, et al. Standards Track [Page 2]
RFC 8173 PTPv2 MIB June 2017 1. Introduction This memo defines a portion of the Management Information Base (MIB) module for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing PTP devices including ordinary clocks, transparent clocks, and boundary clocks. This MIB module is restricted to reading standard PTP data elements, as described in [IEEE-1588-2008]. This enables it to monitor the operation of PTP clocks within the network. It is envisioned that this MIB module will complement other managed objects to be defined that will provide more detailed information on the performance of PTP clocks supporting the Telecom Profile defined in [G.8265.1] and any future profiles that may be defined. Those objects are considered out of scope for the current document. Similarly, this MIB module is read-only and not intended to provide the ability to configure PTP clocks. Since PTP clocks are often embedded in other network elements such as routers, switches, and gateways, this ability is generally provided via the configuration interface for the network element. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 1.1. Relationship to Other Profiles and MIBs This MIB module is intended to be used with the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. As stated above, it is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of PTP clocks supporting specific PTP profiles, e.g., the Telecom Profile defined in [G.8265.1]. Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Shankarkumar, et al. Standards Track [Page 3]
RFC 8173 PTPv2 MIB June 2017 2. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. 3. Overview The objects defined in this MIB module are to be used when describing the Precision Time Protocol (PTP), as defined in [IEEE-1588-2008]. Section 6 of [IEEE-1588-2008] provides an overview of synchronization networks using PTP. Terms used in this document have meanings as defined in Section 3.1 of [IEEE-1588-2008]. Shankarkumar, et al. Standards Track [Page 4]
RFC 8173 PTPv2 MIB June 2017 4. PTP MIB Definition PTPBASE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Gauge32, Unsigned32, Counter32, Counter64, mib-2, Integer32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, DisplayString, AutonomousType FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB; ptpbaseMIB MODULE-IDENTITY LAST-UPDATED "201705300000Z" ORGANIZATION "TICTOC Working Group" CONTACT-INFO "WG Email: tictoc@ietf.org Vinay Shankarkumar Cisco Systems Email: vinays@cisco.com Laurent Montini Cisco Systems Email: lmontini@cisco.com Tim Frost Calnex Solutions Ltd. Email: tim.frost@calnexsol.com Greg Dowd Microsemi Inc. Email: greg.dowd@microsemi.com" Shankarkumar, et al. Standards Track [Page 5]
RFC 8173 PTPv2 MIB June 2017 DESCRIPTION "The MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Overview of PTP version 2 (IEEE Std. 1588-2008) [IEEE-1588-2008] defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with packet-based networks, the Precision Time Protocol version 2 (PTPv2). This MIB module does not address PTPv1, the earlier version defined in IEEE Std. 1588-2002. The protocol is applicable to network elements communicating using IP. The protocol enables heterogeneous systems that include clocks of various inherent precision, resolution, and stability to synchronize to a grandmaster clock. The protocol supports system-wide synchronization accuracy in the sub-microsecond range with minimal network and local clock computing resources. [IEEE-1588-2008] uses UDP/IP or Ethernet and can be adapted to other mappings. It includes formal mechanisms for message extensions, higher sampling rates, correction for asymmetry, a clock type to reduce error accumulation in large topologies, and specifications on how to incorporate the resulting additional data into the synchronization protocol. [IEEE-1588-2008] also defines conformance and management capability. MIB description This MIB module supports the Precision Time Protocol version 2 (PTPv2, hereafter designated as PTP) features of network element system devices, when using the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. It is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of the PTP devices and telecom clocks supporting specific PTP profiles. Shankarkumar, et al. Standards Track [Page 6]
RFC 8173 PTPv2 MIB June 2017 Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Technical terms used in this module are defined in [IEEE-1588-2008]. The MIB module refers to sections of [IEEE-1588-2008]. Abbreviations: E2E End-to-End EUI Extended Unique Identifier GPS Global Positioning System IANA Internet Assigned Numbers Authority IP Internet Protocol NTP Network Time Protocol (see [RFC5905]) P2P Peer-to-Peer PTP Precision Time Protocol TAI International Atomic Time UDP User Datagram Protocol UTC Coordinated Universal Time References: [IEEE-1588-2008] IEEE Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Std. 1588-2008, July 2008. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX ------------------- --------------------- ------------------ 5.3.2 TimeInterval PtpClockTimeInterval OCTET STRING(SIZE(1..255)) 5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6)) 5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8)) 5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535) 5.3.7 ClockQuality PtpClockQualityClassType " REVISION "201705300000Z" DESCRIPTION "Initial version of this MIB module, published as RFC 8173." ::= { mib-2 241 } Shankarkumar, et al. Standards Track [Page 7]
RFC 8173 PTPv2 MIB June 2017 -- Textual Conventions PtpClockDomainType ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The Domain is identified by an integer, the domainNumber, in the range of 0 to 255. An integer value that is used to assign each PTP device to a particular domain." REFERENCE "Section 7.1 ('Domains') and Table 2 ('domainNumber') of [IEEE-1588-2008]" SYNTAX Unsigned32 (0..255) PtpClockIdentity ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "The clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual assigned numbers as indicated in Section 7.5.2.2.2 of [IEEE-1588-2008]. It can also be a non-EUI-64 address as defined in Section 7.5.2.2.3 of [IEEE-1588-2008]. The clock identifier can be constructed from existing EUI-48 assignments." REFERENCE "Section 7.5.2.2.1 ('General') of [IEEE-1588-2008]" SYNTAX OCTET STRING (SIZE (8)) PtpClockInstanceType ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The instance of the clock of a given clock type in a given domain." SYNTAX Unsigned32 (0..255) PtpClockIntervalBase2 ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The interval included in message types Announce, Sync, Delay_Req, and Pdelay_Req as indicated in Section 7.7.2.1 of [IEEE-1588-2008]." Shankarkumar, et al. Standards Track [Page 8]
RFC 8173 PTPv2 MIB June 2017 REFERENCE "Section 7.7.2.1 ('General interval specification') of [IEEE-1588-2008]" SYNTAX Integer32 (-128..127) PtpClockMechanismType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The clock type based on whether end-to-end or peer-to-peer mechanisms are used. The mechanism used to calculate the Mean Path Delay as indicated in Table 9 of [IEEE-1588-2008]." REFERENCE "Sections 8.2.5.4.4 ('portDS.delayMechanism'), 6.6.4 ('Measuring link propagation delay in clocks supporting peer-to-peer path correction'), and 7.4.2 ('communication Path asymmetry') of [IEEE-1588-2008]." SYNTAX INTEGER { e2e(1), p2p(2), disabled(254) } PtpClockPortNumber ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "An index identifying a specific PTP port on a PTP node." REFERENCE "Sections 7.5.2.3 ('portNumber') and 5.3.5 ('PortIdentity') of [IEEE-1588-2008]" SYNTAX Unsigned32 (0..65535) PtpClockPortState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This is the value of the current state of the protocol engine associated with this port." REFERENCE "Sections 8.2.5.3.1 ('portState') and 9.2.5 ('State machines') of [IEEE-1588-2008]" SYNTAX INTEGER { initializing(1), faulty(2), disabled(3), listening(4), preMaster(5), Shankarkumar, et al. Standards Track [Page 9]
RFC 8173 PTPv2 MIB June 2017 master(6), passive(7), uncalibrated(8), slave(9) } PtpClockPortTransportTypeAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "The clock port transport protocol address used for this communication between the clock nodes. This is a string corresponding to the address type as specified by the transport type used. The transport types can be defined elsewhere, in addition to the ones defined in this document. This can be an address of type IP version 4, IP version 6, Ethernet, DeviceNET, ControlNET, or IEC61158. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportTypes will be used in the values contained in the OCTET STRING." REFERENCE "Annex D (IPv4), Annex E (IPv6), Annex F (Ethernet), Annex G (DeviceNET), Annex H (ControlNET), and Annex I (IEC61158) of [IEEE-1588-2008]" SYNTAX OCTET STRING (SIZE (1..255)) PtpClockProfileType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Clock Profile used. A profile is the set of allowed PTP features applicable to a device." REFERENCE "Sections 3.1.30 ('profile') and 19.3 ('PTP profiles') of [IEEE-1588-2008]" SYNTAX INTEGER { default(1), telecom(2), vendorspecific(3) } PtpClockQualityAccuracyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ClockQuality as specified in Section 5.3.7, Section 7.6.2.5, and Table 6 of [IEEE-1588-2008]. The following values are not represented in the enumerated values. Shankarkumar, et al. Standards Track [Page 10]
RFC 8173 PTPv2 MIB June 2017 0x01-0x1F Reserved 0x32-0x7F Reserved It is important to note that Section 7.1.1 of RFC 2578 allows for gaps and for enumerated values to start at zero when indicated by the protocol." REFERENCE "Section 5.3.7 ('ClockQuality'), Section 7.6.2.5 ('clockAccuracy'), and Table 6 ('clockAccuracy enumeration') of [IEEE-1588-2008]" SYNTAX INTEGER { -- reserved00(0:31), 0x00 to 0x1F nanoSecond25(32), -- 0x20 nanoSecond100(33), -- 0x21 nanoSecond250(34), -- 0x22 microSec1(35), -- 0x23 microSec2dot5(36), -- 0x24 microSec10(37), -- 0x25 microSec25(38), -- 0x26 microSec100(39), -- 0x27 microSec250(40), -- 0x28 milliSec1(41), -- 0x29 milliSec2dot5(42), -- 0x2A milliSec10(43), -- 0x2B milliSec25(44), -- 0x2C milliSec100(45), -- 0x2D milliSec250(46), -- 0x2E second1(47), -- 0x2F second10(48), -- 0x30 secondGreater10(49), -- 0x31 unknown(254) -- 0xFE -- reserved255(255), 0xFF } PtpClockQualityClassType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ClockQuality as specified in Section 5.3.7, Section 7.6.2.4, and Table 5 of [IEEE-1588-2008]." REFERENCE "Section 5.3.7 ('ClockQuality'), Section 7.6.2.4 ('clockClass'), and Table 5 ('clockClass specifications') of [IEEE-1588-2008]." SYNTAX INTEGER { -- reserved(0), 0x00 -- reserved(1:5), 0x01 to 0x05 clockclass6(6), -- 0x06 Shankarkumar, et al. Standards Track [Page 11]
RFC 8173 PTPv2 MIB June 2017 clockclass7(7), -- 0x07 -- reserved(8), 0x08 -- reserved(9:10), 0x09 to 0x0A -- reserved(11:12), 0x0B, 0x0C clockclass13(13), -- 0x0D clockclass14(14), -- 0x0E -- reserved(15:51), 0x0F to 0x33 clockclass52(52), -- 0x34 -- reserved(53:57), 0x35 to 0x39 clockclass58(58) -- 0x3A -- reserved(59:67), 0x3B to 0x43 -- otherprofiles(68:122), 0x44 to 0x7A -- reserved(123:127), 0x7B to 0x7F -- reserved(128:132), 0x80 to 0x84 } PtpClockRoleType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Clock Role. The protocol generates a master-slave relationship among the clocks in the system. Clock Role Value ------------------------- Master clock 1 Slave clock 2 " SYNTAX INTEGER { master(1), slave(2) } PtpClockStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The clock state returned by a PTP engine. Clock State Value ------------------------ Freerun state 1 Holdover state 2 Acquiring state 3 Freq_locked state 4 Phase_aligned state 5 " SYNTAX INTEGER { freerun(1), holdover(2), acquiring(3), frequencyLocked(4), Shankarkumar, et al. Standards Track [Page 12]
RFC 8173 PTPv2 MIB June 2017 phaseAligned(5) } PtpClockTimeInterval ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "This textual convention corresponds to the TimeInterval structure indicated in Section 5.3.2 of [IEEE-1588-2008]. It will be presented in the form of a character array. Network byte order is assumed." REFERENCE "Sections 5.3.2 ('TimeInterval') and 7.7.2.1 ('Timer interval specification') of [IEEE-1588-2008]" SYNTAX OCTET STRING (SIZE (1..255)) PtpClockTimeSourceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ClockQuality as specified in Sections 5.3.7, Section 7.6.2.6, and Table 7 of [IEEE-1588-2008]. The following values are not represented in the enumerated values. 0xF0-0xFE For use by alternate PTP profiles 0xFF Reserved It is important to note that Section 7.1.1 of RFC 2578 allows for gaps and for enumerated values to start at zero when indicated by the protocol." REFERENCE "Section 5.3.7 ('ClockQuality'), Section 7.6.2.6 ('timeSource'), and Table 7 ('timeSource enumeration') of [IEEE-1588-2008]." SYNTAX INTEGER { atomicClock(16), -- 0x10 gps(32), -- 0x20 terrestrialRadio(48), -- 0x22 ptp(64), -- 0x40 ntp(80), -- 0x50 handSet(96), -- 0x60 other(144), -- 0x90 internalOscillator(160) -- 0xA0 } Shankarkumar, et al. Standards Track [Page 13]
RFC 8173 PTPv2 MIB June 2017 PtpClockTxModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Transmission mode. Unicast: Using unicast communication channel. Multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel" SYNTAX INTEGER { unicast(1), multicast(2), multicastmix(3) } PtpClockType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The clock types as defined in the MIB module description." REFERENCE "Section 6.5.1 ('PTP device types') of [IEEE-1588-2008]." SYNTAX INTEGER { ordinaryClock(1), boundaryClock(2), transparentClock(3), boundaryNode(4) } ptpbaseMIBNotifs OBJECT IDENTIFIER ::= { ptpbaseMIB 0 } ptpbaseMIBObjects OBJECT IDENTIFIER ::= { ptpbaseMIB 1 } ptpbaseMIBConformance OBJECT IDENTIFIER ::= { ptpbaseMIB 2 } ptpbaseMIBSystemInfo OBJECT IDENTIFIER ::= { ptpbaseMIBObjects 1 } ptpbaseMIBClockInfo OBJECT IDENTIFIER ::= { ptpbaseMIBObjects 2 } Shankarkumar, et al. Standards Track [Page 14]
RFC 8173 PTPv2 MIB June 2017 ptpbaseSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of count information about the PTP system for all domains." ::= { ptpbaseMIBSystemInfo 1 } ptpbaseSystemEntry OBJECT-TYPE SYNTAX PtpbaseSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unconfiguration of the PTP clock removes them." INDEX { ptpDomainIndex, ptpInstanceIndex } ::= { ptpbaseSystemTable 1 } PtpbaseSystemEntry ::= SEQUENCE { ptpDomainIndex PtpClockDomainType, ptpInstanceIndex PtpClockInstanceType, ptpDomainClockPortsTotal Gauge32 } ptpDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol. 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved" ::= { ptpbaseSystemEntry 1 } Shankarkumar, et al. Standards Track [Page 15]
RFC 8173 PTPv2 MIB June 2017 ptpInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this domain." ::= { ptpbaseSystemEntry 2 } ptpDomainClockPortsTotal OBJECT-TYPE SYNTAX Gauge32 UNITS "ptp ports" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of clock ports configured within a domain in the system." ::= { ptpbaseSystemEntry 3 } ptpbaseSystemDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseSystemDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP system for all clock modes -- ordinary, boundary, or transparent." ::= { ptpbaseMIBSystemInfo 2 } ptpbaseSystemDomainEntry OBJECT-TYPE SYNTAX PtpbaseSystemDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node." INDEX { ptpbaseSystemDomainClockTypeIndex } ::= { ptpbaseSystemDomainTable 1 } PtpbaseSystemDomainEntry ::= SEQUENCE { ptpbaseSystemDomainClockTypeIndex PtpClockType, ptpbaseSystemDomainTotals Unsigned32 } Shankarkumar, et al. Standards Track [Page 16]
RFC 8173 PTPv2 MIB June 2017 ptpbaseSystemDomainClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseSystemDomainEntry 1 } ptpbaseSystemDomainTotals OBJECT-TYPE SYNTAX Unsigned32 UNITS "domains" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of PTP domains for this particular clock type configured in this node." ::= { ptpbaseSystemDomainEntry 2 } ptpbaseSystemProfile OBJECT-TYPE SYNTAX PtpClockProfileType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP profile implemented on the system." REFERENCE "Section 19.3 ('PTP profiles') of [IEEE-1588-2008]" ::= { ptpbaseMIBSystemInfo 3 } ptpbaseClockCurrentDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockCurrentDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock currentDS for all domains." ::= { ptpbaseMIBClockInfo 1 } ptpbaseClockCurrentDSEntry OBJECT-TYPE SYNTAX PtpbaseClockCurrentDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single PTP clock currentDS for a domain." REFERENCE "Section 8.2.2 ('currentDS data set member Shankarkumar, et al. Standards Track [Page 17]
RFC 8173 PTPv2 MIB June 2017 specifications') of [IEEE-1588-2008]" INDEX { ptpbaseClockCurrentDSDomainIndex, ptpbaseClockCurrentDSClockTypeIndex, ptpbaseClockCurrentDSInstanceIndex } ::= { ptpbaseClockCurrentDSTable 1 } PtpbaseClockCurrentDSEntry ::= SEQUENCE { ptpbaseClockCurrentDSDomainIndex PtpClockDomainType, ptpbaseClockCurrentDSClockTypeIndex PtpClockType, ptpbaseClockCurrentDSInstanceIndex PtpClockInstanceType, ptpbaseClockCurrentDSStepsRemoved Unsigned32, ptpbaseClockCurrentDSOffsetFromMaster PtpClockTimeInterval, ptpbaseClockCurrentDSMeanPathDelay PtpClockTimeInterval } ptpbaseClockCurrentDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockCurrentDSEntry 1 } ptpbaseClockCurrentDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseClockCurrentDSEntry 2 } ptpbaseClockCurrentDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockCurrentDSEntry 3 } Shankarkumar, et al. Standards Track [Page 18]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockCurrentDSStepsRemoved OBJECT-TYPE SYNTAX Unsigned32 UNITS "Steps" MAX-ACCESS read-only STATUS current DESCRIPTION "The current clock dataset stepsRemoved value. This object specifies the distance measured by the number of boundary clocks between the local clock and the foreign master as indicated in the stepsRemoved field of Announce messages." REFERENCE "Section 8.2.2.2 ('stepsRemoved') of [IEEE-1588-2008]" ::= { ptpbaseClockCurrentDSEntry 4 } ptpbaseClockCurrentDSOffsetFromMaster OBJECT-TYPE SYNTAX PtpClockTimeInterval UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock." REFERENCE "Section 8.2.2.3 ('currentDS.offsetFromMaster') of [IEEE-1588-2008]" ::= { ptpbaseClockCurrentDSEntry 5 } ptpbaseClockCurrentDSMeanPathDelay OBJECT-TYPE SYNTAX PtpClockTimeInterval UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mechanism." REFERENCE "Section 8.2.2.4 ('currentDS.meanPathDelay') of [IEEE-1588-2008]" ::= { ptpbaseClockCurrentDSEntry 6 } Shankarkumar, et al. Standards Track [Page 19]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockParentDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockParentDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock parentDS for all domains." ::= { ptpbaseMIBClockInfo 2 } ptpbaseClockParentDSEntry OBJECT-TYPE SYNTAX PtpbaseClockParentDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single PTP clock parentDS for a domain." REFERENCE "Section 8.2.3 ('parentDS data set member specifications') of [IEEE-1588-2008]" INDEX { ptpbaseClockParentDSDomainIndex, ptpbaseClockParentDSClockTypeIndex, ptpbaseClockParentDSInstanceIndex } ::= { ptpbaseClockParentDSTable 1 } PtpbaseClockParentDSEntry ::= SEQUENCE { ptpbaseClockParentDSDomainIndex PtpClockDomainType, ptpbaseClockParentDSClockTypeIndex PtpClockType, ptpbaseClockParentDSInstanceIndex PtpClockInstanceType, ptpbaseClockParentDSParentPortIdentity OCTET STRING, ptpbaseClockParentDSParentStats TruthValue, ptpbaseClockParentDSOffset PtpClockIntervalBase2, ptpbaseClockParentDSClockPhChRate Integer32, ptpbaseClockParentDSGMClockIdentity PtpClockIdentity, ptpbaseClockParentDSGMClockPriority1 Unsigned32, ptpbaseClockParentDSGMClockPriority2 Unsigned32, ptpbaseClockParentDSGMClockQualityClass PtpClockQualityClassType, ptpbaseClockParentDSGMClockQualityAccuracy PtpClockQualityAccuracyType, ptpbaseClockParentDSGMClockQualityOffset Unsigned32 } Shankarkumar, et al. Standards Track [Page 20]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockParentDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockParentDSEntry 1 } ptpbaseClockParentDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseClockParentDSEntry 2 } ptpbaseClockParentDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockParentDSEntry 3 } ptpbaseClockParentDSParentPortIdentity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock." REFERENCE "Section 8.2.3.2 ('parentDS.parentPortIdentity') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 4 } Shankarkumar, et al. Standards Track [Page 21]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockParentDSParentStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parentDS ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data." REFERENCE "Section 8.2.3.3 ('parentDS.parentStats') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 5 } ptpbaseClockParentDSOffset OBJECT-TYPE SYNTAX PtpClockIntervalBase2 (-128..127) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parentDS ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock." REFERENCE "Section 8.2.3.4 ('parentDS.observedParentOffsetScaledLogVariance') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 6 } ptpbaseClockParentDSClockPhChRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the clock's parentDS ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by the slave clock." REFERENCE "Section 8.2.3.5 ('parentDS.observedParentClockPhaseChangeRate') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 7 } Shankarkumar, et al. Standards Track [Page 22]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockParentDSGMClockIdentity OBJECT-TYPE SYNTAX PtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parentDS grandmaster clock identity." REFERENCE "Section 8.2.3.6 ('parentDS.grandmasterIdentity') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 8 } ptpbaseClockParentDSGMClockPriority1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parentDS grandmaster clock priority1." REFERENCE "Section 8.2.3.8 ('parentDS.grandmasterPriority1') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 9 } ptpbaseClockParentDSGMClockPriority2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parentDS grandmaster clock priority2." REFERENCE "Section 8.2.3.9 ('parentDS.grandmasterPriority2') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 10 } ptpbaseClockParentDSGMClockQualityClass OBJECT-TYPE SYNTAX PtpClockQualityClassType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parentDS grandmaster clock quality class." REFERENCE "Section 8.2.3.7 ('parentDS.grandmasterClockQuality') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 11 } Shankarkumar, et al. Standards Track [Page 23]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockParentDSGMClockQualityAccuracy OBJECT-TYPE SYNTAX PtpClockQualityAccuracyType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parentDS grandmaster clock quality accuracy." REFERENCE "Section 8.2.3.7 ('parentDS.grandmasterClockQuality') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 12 } ptpbaseClockParentDSGMClockQualityOffset OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the parentDS grandmaster clock quality offset." REFERENCE "Section 8.2.3.7 ('parentDS.grandmasterClockQuality') of [IEEE-1588-2008]" ::= { ptpbaseClockParentDSEntry 13 } ptpbaseClockDefaultDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockDefaultDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock defaultDS for all domains." ::= { ptpbaseMIBClockInfo 3 } ptpbaseClockDefaultDSEntry OBJECT-TYPE SYNTAX PtpbaseClockDefaultDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single PTP clock defaultDS for a domain." INDEX { ptpbaseClockDefaultDSDomainIndex, ptpbaseClockDefaultDSClockTypeIndex, ptpbaseClockDefaultDSInstanceIndex } ::= { ptpbaseClockDefaultDSTable 1 } PtpbaseClockDefaultDSEntry ::= SEQUENCE { Shankarkumar, et al. Standards Track [Page 24]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockDefaultDSDomainIndex PtpClockDomainType, ptpbaseClockDefaultDSClockTypeIndex PtpClockType, ptpbaseClockDefaultDSInstanceIndex PtpClockInstanceType, ptpbaseClockDefaultDSTwoStepFlag TruthValue, ptpbaseClockDefaultDSClockIdentity PtpClockIdentity, ptpbaseClockDefaultDSPriority1 Unsigned32, ptpbaseClockDefaultDSPriority2 Unsigned32, ptpbaseClockDefaultDSSlaveOnly TruthValue, ptpbaseClockDefaultDSQualityClass PtpClockQualityClassType, ptpbaseClockDefaultDSQualityAccuracy PtpClockQualityAccuracyType, ptpbaseClockDefaultDSQualityOffset Integer32 } ptpbaseClockDefaultDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockDefaultDSEntry 1 } ptpbaseClockDefaultDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseClockDefaultDSEntry 2 } ptpbaseClockDefaultDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockDefaultDSEntry 3 } ptpbaseClockDefaultDSTwoStepFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies whether the two-step process is used." ::= { ptpbaseClockDefaultDSEntry 4 } Shankarkumar, et al. Standards Track [Page 25]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockDefaultDSClockIdentity OBJECT-TYPE SYNTAX PtpClockIdentity MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the defaultDS clockIdentity member." ::= { ptpbaseClockDefaultDSEntry 5 } ptpbaseClockDefaultDSPriority1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the defaultDS priority1 member." ::= { ptpbaseClockDefaultDSEntry 6 } ptpbaseClockDefaultDSPriority2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the defaultDS priority2 member." ::= { ptpbaseClockDefaultDSEntry 7 } ptpbaseClockDefaultDSSlaveOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies whether the SlaveOnly flag is set." ::= { ptpbaseClockDefaultDSEntry 8 } ptpbaseClockDefaultDSQualityClass OBJECT-TYPE SYNTAX PtpClockQualityClassType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the defaultDS Quality Class." ::= { ptpbaseClockDefaultDSEntry 9 } ptpbaseClockDefaultDSQualityAccuracy OBJECT-TYPE SYNTAX PtpClockQualityAccuracyType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the defaultDS Quality Accuracy." ::= { ptpbaseClockDefaultDSEntry 10 } Shankarkumar, et al. Standards Track [Page 26]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockDefaultDSQualityOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the defaultDS Quality offset." ::= { ptpbaseClockDefaultDSEntry 11 } ptpbaseClockRunningTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockRunningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock running datasets for all domains." ::= { ptpbaseMIBClockInfo 4 } ptpbaseClockRunningEntry OBJECT-TYPE SYNTAX PtpbaseClockRunningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single PTP clock running dataset for a domain." INDEX { ptpbaseClockRunningDomainIndex, ptpbaseClockRunningClockTypeIndex, ptpbaseClockRunningInstanceIndex } ::= { ptpbaseClockRunningTable 1 } PtpbaseClockRunningEntry ::= SEQUENCE { ptpbaseClockRunningDomainIndex PtpClockDomainType, ptpbaseClockRunningClockTypeIndex PtpClockType, ptpbaseClockRunningInstanceIndex PtpClockInstanceType, ptpbaseClockRunningState PtpClockStateType, ptpbaseClockRunningPacketsSent Counter64, ptpbaseClockRunningPacketsReceived Counter64 } Shankarkumar, et al. Standards Track [Page 27]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockRunningDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockRunningEntry 1 } ptpbaseClockRunningClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseClockRunningEntry 2 } ptpbaseClockRunningInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockRunningEntry 3 } ptpbaseClockRunningState OBJECT-TYPE SYNTAX PtpClockStateType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the clock state returned by a PTP engine." ::= { ptpbaseClockRunningEntry 4 } ptpbaseClockRunningPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters are discontinuous." ::= { ptpbaseClockRunningEntry 5 } Shankarkumar, et al. Standards Track [Page 28]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockRunningPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters are discontinuous." ::= { ptpbaseClockRunningEntry 6 } ptpbaseClockTimePropertiesDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockTimePropertiesDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP clock timePropertiesDS for all domains." ::= { ptpbaseMIBClockInfo 5 } ptpbaseClockTimePropertiesDSEntry OBJECT-TYPE SYNTAX PtpbaseClockTimePropertiesDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single PTP clock timePropertiesDS for a domain." REFERENCE "Section 8.2.4 ('timePropertiesDS data set member specifications') of [IEEE-1588-2008]" INDEX { ptpbaseClockTimePropertiesDSDomainIndex, ptpbaseClockTimePropertiesDSClockTypeIndex, ptpbaseClockTimePropertiesDSInstanceIndex } ::= { ptpbaseClockTimePropertiesDSTable 1 } PtpbaseClockTimePropertiesDSEntry ::= SEQUENCE { ptpbaseClockTimePropertiesDSDomainIndex PtpClockDomainType, ptpbaseClockTimePropertiesDSClockTypeIndex PtpClockType, ptpbaseClockTimePropertiesDSInstanceIndex PtpClockInstanceType, ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid TruthValue, ptpbaseClockTimePropertiesDSCurrentUTCOffset Integer32, ptpbaseClockTimePropertiesDSLeap59 TruthValue, ptpbaseClockTimePropertiesDSLeap61 TruthValue, ptpbaseClockTimePropertiesDSTimeTraceable TruthValue, ptpbaseClockTimePropertiesDSFreqTraceable TruthValue, ptpbaseClockTimePropertiesDSPTPTimescale TruthValue, Shankarkumar, et al. Standards Track [Page 29]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockTimePropertiesDSSource PtpClockTimeSourceType } ptpbaseClockTimePropertiesDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockTimePropertiesDSEntry 1 } ptpbaseClockTimePropertiesDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseClockTimePropertiesDSEntry 2 } ptpbaseClockTimePropertiesDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockTimePropertiesDSEntry 3 } ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the timePropertiesDS value of whether the current UTC offset is valid." REFERENCE "Section 8.2.4.2 ('timePropertiesDS.currentUtcOffset') of [IEEE-1588-2008]" ::= { ptpbaseClockTimePropertiesDSEntry 4 } ptpbaseClockTimePropertiesDSCurrentUTCOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current Shankarkumar, et al. Standards Track [Page 30]
RFC 8173 PTPv2 MIB June 2017 DESCRIPTION "This object specifies the timePropertiesDS value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentUtcOffset is the offset between TAI and UTC; otherwise, the value has no meaning. The value shall be in units of seconds." REFERENCE "Section 8.2.4.3 ('timePropertiesDS.currentUtcOffsetValid') of [IEEE-1588-2008]" ::= { ptpbaseClockTimePropertiesDSEntry 5 } ptpbaseClockTimePropertiesDSLeap59 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Leap59 value in the clock currentDS." REFERENCE "Section 8.2.4.4 ('timePropertiesDS.leap59') of [IEEE-1588-2008]" ::= { ptpbaseClockTimePropertiesDSEntry 6 } ptpbaseClockTimePropertiesDSLeap61 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Leap61 value in the clock currentDS." REFERENCE "Section 8.2.4.5 ('timePropertiesDS.leap61') of [IEEE-1588-2008]" ::= { ptpbaseClockTimePropertiesDSEntry 7 } ptpbaseClockTimePropertiesDSTimeTraceable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Time Traceable value in the clock currentDS." REFERENCE "Section 8.2.4.6 ('timePropertiesDS.timeTraceable') of [IEEE-1588-2008]" ::= { ptpbaseClockTimePropertiesDSEntry 8 } Shankarkumar, et al. Standards Track [Page 31]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockTimePropertiesDSFreqTraceable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Frequency Traceable value in the clock currentDS." REFERENCE "Section 8.2.4.7 ('timePropertiesDS.frequencyTraceable') of [IEEE-1588-2008]" ::= { ptpbaseClockTimePropertiesDSEntry 9 } ptpbaseClockTimePropertiesDSPTPTimescale OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP Timescale value in the clock currentDS." REFERENCE "Section 8.2.4.8 ('timePropertiesDS.ptpTimescale') of [IEEE-1588-2008]" ::= { ptpbaseClockTimePropertiesDSEntry 10 } ptpbaseClockTimePropertiesDSSource OBJECT-TYPE SYNTAX PtpClockTimeSourceType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Timesource value in the clock currentDS." REFERENCE "Section 8.2.4.9 ('timePropertiesDS.timeSource') of [IEEE-1588-2008]" ::= { ptpbaseClockTimePropertiesDSEntry 11 } ptpbaseClockTransDefaultDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockTransDefaultDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the PTP transparentClockDefaultDS for all domains." ::= { ptpbaseMIBClockInfo 6 } Shankarkumar, et al. Standards Track [Page 32]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockTransDefaultDSEntry OBJECT-TYPE SYNTAX PtpbaseClockTransDefaultDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single PTP transparent clock defaultDS for a domain." REFERENCE "Section 8.3.2 ('transparentClockDefaultDS data set member specifications') of [IEEE-1588-2008]" INDEX { ptpbaseClockTransDefaultDSDomainIndex, ptpbaseClockTransDefaultDSInstanceIndex } ::= { ptpbaseClockTransDefaultDSTable 1 } PtpbaseClockTransDefaultDSEntry ::= SEQUENCE { ptpbaseClockTransDefaultDSDomainIndex PtpClockDomainType, ptpbaseClockTransDefaultDSInstanceIndex PtpClockInstanceType, ptpbaseClockTransDefaultDSClockIdentity PtpClockIdentity, ptpbaseClockTransDefaultDSNumOfPorts Counter32, ptpbaseClockTransDefaultDSDelay PtpClockMechanismType, ptpbaseClockTransDefaultDSPrimaryDomain PtpClockDomainType } ptpbaseClockTransDefaultDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockTransDefaultDSEntry 1 } ptpbaseClockTransDefaultDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockTransDefaultDSEntry 2 } ptpbaseClockTransDefaultDSClockIdentity OBJECT-TYPE SYNTAX PtpClockIdentity MAX-ACCESS read-only STATUS current Shankarkumar, et al. Standards Track [Page 33]
RFC 8173 PTPv2 MIB June 2017 DESCRIPTION "This object specifies the value of the clockIdentity attribute of the local clock." REFERENCE "Section 8.3.2.2.1 ('transparentClockDefaultDS.clockIdentity') of [IEEE-1588-2008]" ::= { ptpbaseClockTransDefaultDSEntry 3 } ptpbaseClockTransDefaultDSNumOfPorts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the number of PTP ports of the device. These counters are discontinuous." REFERENCE "Section 8.3.2.2.2 ('transparentClockDefaultDS.numberPorts') of [IEEE-1588-2008]" ::= { ptpbaseClockTransDefaultDSEntry 4 } ptpbaseClockTransDefaultDSDelay OBJECT-TYPE SYNTAX PtpClockMechanismType MAX-ACCESS read-only STATUS current DESCRIPTION "This object, if the transparent clock is an end-to-end transparent clock, has the value of e2e; if the transparent clock is a peer-to-peer transparent clock, the value is p2p." REFERENCE "Section 8.3.2.3.1 ('transparentClockDefaultDS.delayMechanism') of [IEEE-1588-2008]" ::= { ptpbaseClockTransDefaultDSEntry 5 } ptpbaseClockTransDefaultDSPrimaryDomain OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of the primary syntonization domain. The initialization value is 0." REFERENCE "Section 8.3.2.3.2 ('transparentClockDefaultDS.primaryDomain') of [IEEE-1588-2008]" ::= { ptpbaseClockTransDefaultDSEntry 6 } Shankarkumar, et al. Standards Track [Page 34]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the clock ports for a particular domain." ::= { ptpbaseMIBClockInfo 7 } ptpbaseClockPortEntry OBJECT-TYPE SYNTAX PtpbaseClockPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single clock port." INDEX { ptpbaseClockPortDomainIndex, ptpbaseClockPortClockTypeIndex, ptpbaseClockPortClockInstanceIndex, ptpbaseClockPortTablePortNumberIndex } ::= { ptpbaseClockPortTable 1 } PtpbaseClockPortEntry ::= SEQUENCE { ptpbaseClockPortDomainIndex PtpClockDomainType, ptpbaseClockPortClockTypeIndex PtpClockType, ptpbaseClockPortClockInstanceIndex PtpClockInstanceType, ptpbaseClockPortTablePortNumberIndex PtpClockPortNumber, ptpbaseClockPortName DisplayString, ptpbaseClockPortRole PtpClockRoleType, ptpbaseClockPortSyncTwoStep TruthValue, ptpbaseClockPortCurrentPeerAddressType AutonomousType, ptpbaseClockPortCurrentPeerAddress PtpClockPortTransportTypeAddress, ptpbaseClockPortNumOfAssociatedPorts Gauge32 } ptpbaseClockPortDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockPortEntry 1 } Shankarkumar, et al. Standards Track [Page 35]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseClockPortEntry 2 } ptpbaseClockPortClockInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockPortEntry 3 } ptpbaseClockPortTablePortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP portNumber for this port." ::= { ptpbaseClockPortEntry 4 } ptpbaseClockPortName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP clock port name configured on the node." ::= { ptpbaseClockPortEntry 5 } ptpbaseClockPortRole OBJECT-TYPE SYNTAX PtpClockRoleType MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the current role (slave/master) of the port." ::= { ptpbaseClockPortEntry 6 } ptpbaseClockPortSyncTwoStep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current Shankarkumar, et al. Standards Track [Page 36]
RFC 8173 PTPv2 MIB June 2017 DESCRIPTION "This object specifies that two-step clock operation between the PTP master and slave device is enabled." ::= { ptpbaseClockPortEntry 7 } ptpbaseClockPortCurrentPeerAddressType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current peer's network address type used for PTP communication." ::= { ptpbaseClockPortEntry 8 } ptpbaseClockPortCurrentPeerAddress OBJECT-TYPE SYNTAX PtpClockPortTransportTypeAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current peer's network address used for PTP communication." ::= { ptpbaseClockPortEntry 9 } ptpbaseClockPortNumOfAssociatedPorts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the following: For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters available to this slave port (might or might not be peered)." ::= { ptpbaseClockPortEntry 10 } ptpbaseClockPortDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockPortDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the clock's portDS for a particular domain." ::= { ptpbaseMIBClockInfo 8 } Shankarkumar, et al. Standards Track [Page 37]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortDSEntry OBJECT-TYPE SYNTAX PtpbaseClockPortDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains portDS information for a single clock port." INDEX { ptpbaseClockPortDSDomainIndex, ptpbaseClockPortDSClockTypeIndex, ptpbaseClockPortDSClockInstanceIndex, ptpbaseClockPortDSPortNumberIndex } ::= { ptpbaseClockPortDSTable 1 } PtpbaseClockPortDSEntry ::= SEQUENCE { ptpbaseClockPortDSDomainIndex PtpClockDomainType, ptpbaseClockPortDSClockTypeIndex PtpClockType, ptpbaseClockPortDSClockInstanceIndex PtpClockInstanceType, ptpbaseClockPortDSPortNumberIndex PtpClockPortNumber, ptpbaseClockPortDSName DisplayString, ptpbaseClockPortDSPortIdentity OCTET STRING, ptpbaseClockPortDSlogAnnouncementInterval PtpClockIntervalBase2, ptpbaseClockPortDSAnnounceRctTimeout Integer32, ptpbaseClockPortDSlogSyncInterval PtpClockIntervalBase2, ptpbaseClockPortDSMinDelayReqInterval Integer32, ptpbaseClockPortDSPeerDelayReqInterval Integer32, ptpbaseClockPortDSDelayMech PtpClockMechanismType, ptpbaseClockPortDSPeerMeanPathDelay PtpClockTimeInterval, ptpbaseClockPortDSGrantDuration Unsigned32, ptpbaseClockPortDSPTPVersion Unsigned32 } ptpbaseClockPortDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockPortDSEntry 1 } ptpbaseClockPortDSClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current Shankarkumar, et al. Standards Track [Page 38]
RFC 8173 PTPv2 MIB June 2017 DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseClockPortDSEntry 2 } ptpbaseClockPortDSClockInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockPortDSEntry 3 } ptpbaseClockPortDSPortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP portNumber associated with this PTP port." ::= { ptpbaseClockPortDSEntry 4 } ptpbaseClockPortDSName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP clock portDS name." ::= { ptpbaseClockPortDSEntry 5 } ptpbaseClockPortDSPortIdentity OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP clock port Identity." ::= { ptpbaseClockPortDSEntry 6 } ptpbaseClockPortDSlogAnnouncementInterval OBJECT-TYPE SYNTAX PtpClockIntervalBase2 UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Announce message transmission interval associated with this clock port." ::= { ptpbaseClockPortDSEntry 7 } Shankarkumar, et al. Standards Track [Page 39]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortDSAnnounceRctTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Announce receipt timeout associated with this clock port." ::= { ptpbaseClockPortDSEntry 8 } ptpbaseClockPortDSlogSyncInterval OBJECT-TYPE SYNTAX PtpClockIntervalBase2 UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Sync message transmission interval." ::= { ptpbaseClockPortDSEntry 9 } ptpbaseClockPortDSMinDelayReqInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Delay_Req message transmission interval." ::= { ptpbaseClockPortDSEntry 10 } ptpbaseClockPortDSPeerDelayReqInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Pdelay_Req message transmission interval." ::= { ptpbaseClockPortDSEntry 11 } ptpbaseClockPortDSDelayMech OBJECT-TYPE SYNTAX PtpClockMechanismType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the delay mechanism used. If the clock is an end-to-end clock, the value is e2e; if the clock is a peer to-peer clock, the value is p2p." ::= { ptpbaseClockPortDSEntry 12 } Shankarkumar, et al. Standards Track [Page 40]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortDSPeerMeanPathDelay OBJECT-TYPE SYNTAX PtpClockTimeInterval UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the peer meanPathDelay." ::= { ptpbaseClockPortDSEntry 13 } ptpbaseClockPortDSGrantDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the grant duration allocated by the master." ::= { ptpbaseClockPortDSEntry 14 } ptpbaseClockPortDSPTPVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP version being used." ::= { ptpbaseClockPortDSEntry 15 } ptpbaseClockPortRunningTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockPortRunningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the clock ports running datasets for a particular domain." ::= { ptpbaseMIBClockInfo 9 } ptpbaseClockPortRunningEntry OBJECT-TYPE SYNTAX PtpbaseClockPortRunningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains running dataset information about a single clock port." Shankarkumar, et al. Standards Track [Page 41]
RFC 8173 PTPv2 MIB June 2017 INDEX { ptpbaseClockPortRunningDomainIndex, ptpbaseClockPortRunningClockTypeIndex, ptpbaseClockPortRunningClockInstanceIndex, ptpbaseClockPortRunningPortNumberIndex } ::= { ptpbaseClockPortRunningTable 1 } PtpbaseClockPortRunningEntry ::= SEQUENCE { ptpbaseClockPortRunningDomainIndex PtpClockDomainType, ptpbaseClockPortRunningClockTypeIndex PtpClockType, ptpbaseClockPortRunningClockInstanceIndex PtpClockInstanceType, ptpbaseClockPortRunningPortNumberIndex PtpClockPortNumber, ptpbaseClockPortRunningName DisplayString, ptpbaseClockPortRunningState PtpClockPortState, ptpbaseClockPortRunningRole PtpClockRoleType, ptpbaseClockPortRunningInterfaceIndex InterfaceIndexOrZero, ptpbaseClockPortRunningTransport AutonomousType, ptpbaseClockPortRunningEncapsulationType AutonomousType, ptpbaseClockPortRunningTxMode PtpClockTxModeType, ptpbaseClockPortRunningRxMode PtpClockTxModeType, ptpbaseClockPortRunningPacketsReceived Counter64, ptpbaseClockPortRunningPacketsSent Counter64 } ptpbaseClockPortRunningDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockPortRunningEntry 1 } ptpbaseClockPortRunningClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the clock type as defined in the textual convention description." ::= { ptpbaseClockPortRunningEntry 2 } ptpbaseClockPortRunningClockInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current Shankarkumar, et al. Standards Track [Page 42]
RFC 8173 PTPv2 MIB June 2017 DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockPortRunningEntry 3 } ptpbaseClockPortRunningPortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP portNumber associated with this clock port." ::= { ptpbaseClockPortRunningEntry 4 } ptpbaseClockPortRunningName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the PTP clock port name." ::= { ptpbaseClockPortRunningEntry 5 } ptpbaseClockPortRunningState OBJECT-TYPE SYNTAX PtpClockPortState MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the port state returned by PTP engine: initializing faulty disabled listening preMaster master passive uncalibrated slave " ::= { ptpbaseClockPortRunningEntry 6 } ptpbaseClockPortRunningRole OBJECT-TYPE SYNTAX PtpClockRoleType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Clock Role." ::= { ptpbaseClockPortRunningEntry 7 } Shankarkumar, et al. Standards Track [Page 43]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortRunningInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the interface on the node being used by the PTP clock for PTP communication." ::= { ptpbaseClockPortRunningEntry 8 } ptpbaseClockPortRunningTransport OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the transport protocol being used for PTP communication (the mapping used)." ::= { ptpbaseClockPortRunningEntry 9 } ptpbaseClockPortRunningEncapsulationType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN or Pseudowire encapsulation) for the PTP messages." ::= { ptpbaseClockPortRunningEntry 10 } ptpbaseClockPortRunningTxMode OBJECT-TYPE SYNTAX PtpClockTxModeType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the clock transmission mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channel" ::= { ptpbaseClockPortRunningEntry 11 } ptpbaseClockPortRunningRxMode OBJECT-TYPE SYNTAX PtpClockTxModeType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the clock receive mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channel" Shankarkumar, et al. Standards Track [Page 44]
RFC 8173 PTPv2 MIB June 2017 ::= { ptpbaseClockPortRunningEntry 12 } ptpbaseClockPortRunningPacketsReceived OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the packets received on the clock port (cumulative). These counters are discontinuous." ::= { ptpbaseClockPortRunningEntry 13 } ptpbaseClockPortRunningPacketsSent OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the packets sent on the clock port (cumulative). These counters are discontinuous." ::= { ptpbaseClockPortRunningEntry 14 } ptpbaseClockPortTransDSTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockPortTransDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about the transparentClockPortDS for a particular domain." ::= { ptpbaseMIBClockInfo 10 } ptpbaseClockPortTransDSEntry OBJECT-TYPE SYNTAX PtpbaseClockPortTransDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains clock port transparent dataset information about a single clock port." INDEX { ptpbaseClockPortTransDSDomainIndex, ptpbaseClockPortTransDSInstanceIndex, ptpbaseClockPortTransDSPortNumberIndex } ::= { ptpbaseClockPortTransDSTable 1 } Shankarkumar, et al. Standards Track [Page 45]
RFC 8173 PTPv2 MIB June 2017 PtpbaseClockPortTransDSEntry ::= SEQUENCE { ptpbaseClockPortTransDSDomainIndex PtpClockDomainType, ptpbaseClockPortTransDSInstanceIndex PtpClockInstanceType, ptpbaseClockPortTransDSPortNumberIndex PtpClockPortNumber, ptpbaseClockPortTransDSPortIdentity PtpClockIdentity, ptpbaseClockPortTransDSlogMinPdelayReqInt PtpClockIntervalBase2, ptpbaseClockPortTransDSFaultyFlag TruthValue, ptpbaseClockPortTransDSPeerMeanPathDelay PtpClockTimeInterval } ptpbaseClockPortTransDSDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the domain number used to create a logical group of PTP devices." ::= { ptpbaseClockPortTransDSEntry 1 } ptpbaseClockPortTransDSInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockPortTransDSEntry 2 } ptpbaseClockPortTransDSPortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP portNumber associated with this port." REFERENCE "Section 7.5.2 ('Port Identity') of [IEEE-1588-2008]" ::= { ptpbaseClockPortTransDSEntry 3 } ptpbaseClockPortTransDSPortIdentity OBJECT-TYPE SYNTAX PtpClockIdentity MAX-ACCESS read-only STATUS current Shankarkumar, et al. Standards Track [Page 46]
RFC 8173 PTPv2 MIB June 2017 DESCRIPTION "This object specifies the value of the PortIdentity attribute of the local port." REFERENCE "Section 8.3.3.2.1 ('transparentClockPortDS.portIdentity') of [IEEE-1588-2008]" ::= { ptpbaseClockPortTransDSEntry 4 } ptpbaseClockPortTransDSlogMinPdelayReqInt OBJECT-TYPE SYNTAX PtpClockIntervalBase2 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval." REFERENCE "Section 8.3.3.3.1 ('transparentClockPortDS.logMinPdelayReqInterval') of [IEEE-1588-2008]" ::= { ptpbaseClockPortTransDSEntry 5 } ptpbaseClockPortTransDSFaultyFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally." REFERENCE "Section 8.3.3.3.2 ('transparentClockPortDS.faultyFlag') of [IEEE-1588-2008]" ::= { ptpbaseClockPortTransDSEntry 6 } ptpbaseClockPortTransDSPeerMeanPathDelay OBJECT-TYPE SYNTAX PtpClockTimeInterval UNITS "Time Interval" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies, if the delayMechanism used is p2p, the value of the estimate of the current one-way propagation delay, i.e., <meanPathDelay> on the link attached to this port, computed using the peer delay mechanism. If the value of the delayMechanism used is e2e, then the value will be zero." REFERENCE "Section 8.3.3.3.3 ('transparentClockPortDS.peerMeanPathDelay') of [IEEE-1588-2008]" ::= { ptpbaseClockPortTransDSEntry 7 } Shankarkumar, et al. Standards Track [Page 47]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortAssociateTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpbaseClockPortAssociateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port. For a slave port: the list of masters available for a given slave port. Session information (packets, errors) to be displayed based on availability and scenario." ::= { ptpbaseMIBClockInfo 11 } -- -- Well Known transport types for PTP communication. -- ptpbaseWellKnownTransportTypes OBJECT IDENTIFIER ::= { ptpbaseMIBClockInfo 12 } ptpbaseTransportTypeIPversion4 OBJECT-IDENTITY STATUS current DESCRIPTION "IP version 4" ::= { ptpbaseWellKnownTransportTypes 1 } ptpbaseTransportTypeIPversion6 OBJECT-IDENTITY STATUS current DESCRIPTION "IP version 6" ::= { ptpbaseWellKnownTransportTypes 2 } ptpbaseTransportTypeEthernet OBJECT-IDENTITY STATUS current DESCRIPTION "Ethernet" ::= { ptpbaseWellKnownTransportTypes 3 } ptpbaseTransportTypeDeviceNET OBJECT-IDENTITY STATUS current DESCRIPTION "Device NET" ::= { ptpbaseWellKnownTransportTypes 4 } Shankarkumar, et al. Standards Track [Page 48]
RFC 8173 PTPv2 MIB June 2017 ptpbaseTransportTypeControlNET OBJECT-IDENTITY STATUS current DESCRIPTION "Control NET" ::= { ptpbaseWellKnownTransportTypes 5 } ptpbaseTransportTypeIEC61158 OBJECT-IDENTITY STATUS current DESCRIPTION "IEC61158" ::= { ptpbaseWellKnownTransportTypes 6 } -- -- Well Known encapsulation types for PTP communication. -- ptpbaseWellKnownEncapsulationTypes OBJECT IDENTIFIER ::= { ptpbaseMIBClockInfo 13 } ptpbaseEncapsulationTypeEthernet OBJECT-IDENTITY STATUS current DESCRIPTION "Ethernet Encapsulation type." ::= { ptpbaseWellKnownEncapsulationTypes 1 } ptpbaseEncapsulationTypeVLAN OBJECT-IDENTITY STATUS current DESCRIPTION "VLAN Encapsulation type." ::= { ptpbaseWellKnownEncapsulationTypes 2 } ptpbaseEncapsulationTypeUDPIPLSP OBJECT-IDENTITY STATUS current DESCRIPTION "UDP/IP over MPLS Encapsulation type." ::= { ptpbaseWellKnownEncapsulationTypes 3 } ptpbaseEncapsulationTypePWUDPIPLSP OBJECT-IDENTITY STATUS current DESCRIPTION "UDP/IP Pseudowire over MPLS Encapsulation type." ::= { ptpbaseWellKnownEncapsulationTypes 4 } Shankarkumar, et al. Standards Track [Page 49]
RFC 8173 PTPv2 MIB June 2017 ptpbaseEncapsulationTypePWEthernetLSP OBJECT-IDENTITY STATUS current DESCRIPTION "Ethernet Pseudowire over MPLS Encapsulation type." ::= { ptpbaseWellKnownEncapsulationTypes 5 } ptpbaseClockPortAssociateEntry OBJECT-TYPE SYNTAX PtpbaseClockPortAssociateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry that contains information about a single associated port for the given clock port." INDEX { ptpClockPortCurrentDomainIndex, ptpClockPortCurrentClockTypeIndex, ptpClockPortCurrentClockInstanceIndex, ptpClockPortCurrentPortNumberIndex, ptpbaseClockPortAssociatePortIndex } ::= { ptpbaseClockPortAssociateTable 1 } PtpbaseClockPortAssociateEntry ::= SEQUENCE { ptpClockPortCurrentDomainIndex PtpClockDomainType, ptpClockPortCurrentClockTypeIndex PtpClockType, ptpClockPortCurrentClockInstanceIndex PtpClockInstanceType, ptpClockPortCurrentPortNumberIndex PtpClockPortNumber, ptpbaseClockPortAssociatePortIndex Unsigned32, ptpbaseClockPortAssociateAddressType AutonomousType, ptpbaseClockPortAssociateAddress PtpClockPortTransportTypeAddress, ptpbaseClockPortAssociatePacketsSent Counter64, ptpbaseClockPortAssociatePacketsReceived Counter64, ptpbaseClockPortAssociateInErrors Counter64, ptpbaseClockPortAssociateOutErrors Counter64 } ptpClockPortCurrentDomainIndex OBJECT-TYPE SYNTAX PtpClockDomainType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the given port's domain number." ::= { ptpbaseClockPortAssociateEntry 1 } Shankarkumar, et al. Standards Track [Page 50]
RFC 8173 PTPv2 MIB June 2017 ptpClockPortCurrentClockTypeIndex OBJECT-TYPE SYNTAX PtpClockType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the given port's clock type." ::= { ptpbaseClockPortAssociateEntry 2 } ptpClockPortCurrentClockInstanceIndex OBJECT-TYPE SYNTAX PtpClockInstanceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the instance of the clock for this clock type in the given domain." ::= { ptpbaseClockPortAssociateEntry 3 } ptpClockPortCurrentPortNumberIndex OBJECT-TYPE SYNTAX PtpClockPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PTP portNumber for the given port." ::= { ptpbaseClockPortAssociateEntry 4 } ptpbaseClockPortAssociatePortIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the associated port's serial number in the current port's context." ::= { ptpbaseClockPortAssociateEntry 5 } ptpbaseClockPortAssociateAddressType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportTypes will be used in the values contained in the OCTET STRING." ::= { ptpbaseClockPortAssociateEntry 6 } Shankarkumar, et al. Standards Track [Page 51]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortAssociateAddress OBJECT-TYPE SYNTAX PtpClockPortTransportTypeAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the peer port's network address used for PTP communication." ::= { ptpbaseClockPortAssociateEntry 7 } ptpbaseClockPortAssociatePacketsSent OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent to this peer port from the current port. These counters are discontinuous." ::= { ptpbaseClockPortAssociateEntry 8 } ptpbaseClockPortAssociatePacketsReceived OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received from this peer port by the current port. These counters are discontinuous." ::= { ptpbaseClockPortAssociateEntry 9 } ptpbaseClockPortAssociateInErrors OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the input errors associated with the peer port. These counters are discontinuous." ::= { ptpbaseClockPortAssociateEntry 10 } ptpbaseClockPortAssociateOutErrors OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the output errors associated with the peer port. These counters are discontinuous." ::= { ptpbaseClockPortAssociateEntry 11 } Shankarkumar, et al. Standards Track [Page 52]
RFC 8173 PTPv2 MIB June 2017 -- Conformance Information Definition ptpbaseMIBCompliances OBJECT IDENTIFIER ::= { ptpbaseMIBConformance 1 } ptpbaseMIBGroups OBJECT IDENTIFIER ::= { ptpbaseMIBConformance 2 } ptpbaseMIBCompliancesSystemInfo MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide system-level information of clock devices. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { ptpbaseMIBSystemInfoGroup } ::= { ptpbaseMIBCompliances 1 } ptpbaseMIBCompliancesClockInfo MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { ptpbaseMIBClockCurrentDSGroup, ptpbaseMIBClockParentDSGroup, ptpbaseMIBClockDefaultDSGroup, ptpbaseMIBClockRunningGroup, ptpbaseMIBClockTimepropertiesGroup } ::= { ptpbaseMIBCompliances 2 } Shankarkumar, et al. Standards Track [Page 53]
RFC 8173 PTPv2 MIB June 2017 ptpbaseMIBCompliancesClockPortInfo MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-port-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { ptpbaseMIBClockPortGroup, ptpbaseMIBClockPortDSGroup, ptpbaseMIBClockPortRunningGroup, ptpbaseMIBClockPortAssociateGroup } ::= { ptpbaseMIBCompliances 3 } ptpbaseMIBCompliancesTransparentClockInfo MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide transparent-clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { ptpbaseMIBClockTranparentDSGroup, ptpbaseMIBClockPortTransDSGroup } ::= { ptpbaseMIBCompliances 4 } ptpbaseMIBSystemInfoGroup OBJECT-GROUP OBJECTS { ptpbaseSystemDomainTotals, ptpDomainClockPortsTotal, ptpbaseSystemProfile } STATUS current DESCRIPTION "Group that aggregates objects describing system-wide information" ::= { ptpbaseMIBGroups 1 } Shankarkumar, et al. Standards Track [Page 54]
RFC 8173 PTPv2 MIB June 2017 ptpbaseMIBClockCurrentDSGroup OBJECT-GROUP OBJECTS { ptpbaseClockCurrentDSStepsRemoved, ptpbaseClockCurrentDSOffsetFromMaster, ptpbaseClockCurrentDSMeanPathDelay } STATUS current DESCRIPTION "Group that aggregates objects describing PTP currentDS information" ::= { ptpbaseMIBGroups 2 } ptpbaseMIBClockParentDSGroup OBJECT-GROUP OBJECTS { ptpbaseClockParentDSParentPortIdentity, ptpbaseClockParentDSParentStats, ptpbaseClockParentDSOffset, ptpbaseClockParentDSClockPhChRate, ptpbaseClockParentDSGMClockIdentity, ptpbaseClockParentDSGMClockPriority1, ptpbaseClockParentDSGMClockPriority2, ptpbaseClockParentDSGMClockQualityClass, ptpbaseClockParentDSGMClockQualityAccuracy, ptpbaseClockParentDSGMClockQualityOffset } STATUS current DESCRIPTION "Group that aggregates objects describing PTP parentDS information" ::= { ptpbaseMIBGroups 3 } ptpbaseMIBClockDefaultDSGroup OBJECT-GROUP OBJECTS { ptpbaseClockDefaultDSTwoStepFlag, ptpbaseClockDefaultDSClockIdentity, ptpbaseClockDefaultDSPriority1, ptpbaseClockDefaultDSPriority2, ptpbaseClockDefaultDSSlaveOnly, ptpbaseClockDefaultDSQualityClass, ptpbaseClockDefaultDSQualityAccuracy, ptpbaseClockDefaultDSQualityOffset } STATUS current DESCRIPTION "Group that aggregates objects describing PTP defaultDS information" ::= { ptpbaseMIBGroups 4 } Shankarkumar, et al. Standards Track [Page 55]
RFC 8173 PTPv2 MIB June 2017 ptpbaseMIBClockRunningGroup OBJECT-GROUP OBJECTS { ptpbaseClockRunningState, ptpbaseClockRunningPacketsSent, ptpbaseClockRunningPacketsReceived } STATUS current DESCRIPTION "Group that aggregates objects describing PTP running state information" ::= { ptpbaseMIBGroups 5 } ptpbaseMIBClockTimepropertiesGroup OBJECT-GROUP OBJECTS { ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid, ptpbaseClockTimePropertiesDSCurrentUTCOffset, ptpbaseClockTimePropertiesDSLeap59, ptpbaseClockTimePropertiesDSLeap61, ptpbaseClockTimePropertiesDSTimeTraceable, ptpbaseClockTimePropertiesDSFreqTraceable, ptpbaseClockTimePropertiesDSPTPTimescale, ptpbaseClockTimePropertiesDSSource } STATUS current DESCRIPTION "Group that aggregates objects describing PTP Time Properties information" ::= { ptpbaseMIBGroups 6 } ptpbaseMIBClockTranparentDSGroup OBJECT-GROUP OBJECTS { ptpbaseClockTransDefaultDSClockIdentity, ptpbaseClockTransDefaultDSNumOfPorts, ptpbaseClockTransDefaultDSDelay, ptpbaseClockTransDefaultDSPrimaryDomain } STATUS current DESCRIPTION "Group that aggregates objects describing PTP transparentClockDefaultDS information" ::= { ptpbaseMIBGroups 7 } ptpbaseMIBClockPortGroup OBJECT-GROUP OBJECTS { ptpbaseClockPortName, ptpbaseClockPortSyncTwoStep, ptpbaseClockPortCurrentPeerAddress, ptpbaseClockPortNumOfAssociatedPorts, Shankarkumar, et al. Standards Track [Page 56]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortCurrentPeerAddressType, ptpbaseClockPortRole } STATUS current DESCRIPTION "Group that aggregates objects describing information for a given PTP Port" ::= { ptpbaseMIBGroups 8 } ptpbaseMIBClockPortDSGroup OBJECT-GROUP OBJECTS { ptpbaseClockPortDSName, ptpbaseClockPortDSPortIdentity, ptpbaseClockPortDSlogAnnouncementInterval, ptpbaseClockPortDSAnnounceRctTimeout, ptpbaseClockPortDSlogSyncInterval, ptpbaseClockPortDSMinDelayReqInterval, ptpbaseClockPortDSPeerDelayReqInterval, ptpbaseClockPortDSDelayMech, ptpbaseClockPortDSPeerMeanPathDelay, ptpbaseClockPortDSGrantDuration, ptpbaseClockPortDSPTPVersion } STATUS current DESCRIPTION "Group that aggregates objects describing PTP portDS information" ::= { ptpbaseMIBGroups 9 } ptpbaseMIBClockPortRunningGroup OBJECT-GROUP OBJECTS { ptpbaseClockPortRunningName, ptpbaseClockPortRunningState, ptpbaseClockPortRunningRole, ptpbaseClockPortRunningInterfaceIndex, ptpbaseClockPortRunningTransport, ptpbaseClockPortRunningEncapsulationType, ptpbaseClockPortRunningTxMode, ptpbaseClockPortRunningRxMode, ptpbaseClockPortRunningPacketsReceived, ptpbaseClockPortRunningPacketsSent } STATUS current DESCRIPTION "Group that aggregates objects describing PTP running interface information" ::= { ptpbaseMIBGroups 10 } Shankarkumar, et al. Standards Track [Page 57]
RFC 8173 PTPv2 MIB June 2017 ptpbaseMIBClockPortTransDSGroup OBJECT-GROUP OBJECTS { ptpbaseClockPortTransDSPortIdentity, ptpbaseClockPortTransDSlogMinPdelayReqInt, ptpbaseClockPortTransDSFaultyFlag, ptpbaseClockPortTransDSPeerMeanPathDelay } STATUS current DESCRIPTION "Group that aggregates objects describing PTP transparentClockPortDS information" ::= { ptpbaseMIBGroups 11 } ptpbaseMIBClockPortAssociateGroup OBJECT-GROUP OBJECTS { ptpbaseClockPortAssociatePacketsSent, ptpbaseClockPortAssociatePacketsReceived, ptpbaseClockPortAssociateAddress, ptpbaseClockPortAssociateAddressType, ptpbaseClockPortAssociateInErrors, ptpbaseClockPortAssociateOutErrors } STATUS current DESCRIPTION "Group that aggregates objects describing information on peer PTP ports for a given PTP clock port" ::= { ptpbaseMIBGroups 12 } END Shankarkumar, et al. Standards Track [Page 58]
RFC 8173 PTPv2 MIB June 2017 5. Security Considerations There are no management objects defined in this MIB module that have a MAX-ACCESS clause of read-write and/or read-create. So, if this MIB module is implemented correctly, then there is no risk that an intruder can alter or create any management objects of this MIB module via direct SNMP SET operations. Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability: ptpDomainClockPortsTotal, ptpbaseSystemDomainTotals, and ptpbaseSystemProfile expose general information about the clock system. ptpbaseClockRunningState, ptpbaseClockRunningPacketsSent, and ptpbaseClockRunningPacketsReceived expose a clock's current running status. ptpbaseClockCurrentDSStepsRemoved, ptpbaseClockCurrentDSOffsetFromMaster, and ptpbaseClockCurrentDSMeanPathDelay expose the values of a clock's current dataset (currentDS). ptpbaseClockParentDSParentPortIdentity, ptpbaseClockParentDSParentStats, ptpbaseClockParentDSOffset, ptpbaseClockParentDSClockPhChRate, ptpbaseClockParentDSGMClockIdentity, ptpbaseClockParentDSGMClockPriority1, ptpbaseClockParentDSGMClockPriority2, ptpbaseClockParentDSGMClockQualityClass, ptpbaseClockParentDSGMClockQualityAccuracy, and ptpbaseClockParentDSGMClockQualityOffset expose the values of a clock's parent dataset (parentDS). ptpbaseClockDefaultDSTwoStepFlag, ptpbaseClockDefaultDSClockIdentity, ptpbaseClockDefaultDSPriority1, ptpbaseClockDefaultDSPriority2, ptpbaseClockDefaultDSSlaveOnly, ptpbaseClockDefaultDSQualityClass, ptpbaseClockDefaultDSQualityAccuracy, and ptpbaseClockDefaultDSQualityOffset expose the values of a clock's default dataset (defaultDS). Shankarkumar, et al. Standards Track [Page 59]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid, ptpbaseClockTimePropertiesDSCurrentUTCOffset, ptpbaseClockTimePropertiesDSLeap59, ptpbaseClockTimePropertiesDSLeap61, ptpbaseClockTimePropertiesDSTimeTraceable, ptpbaseClockTimePropertiesDSFreqTraceable, ptpbaseClockTimePropertiesDSPTPTimescale, and ptpbaseClockTimePropertiesDSSource expose the values of a clock's time properties dataset (timePropertiesDS). ptpbaseClockTransDefaultDSClockIdentity, ptpbaseClockTransDefaultDSNumOfPorts, ptpbaseClockTransDefaultDSDelay, and ptpbaseClockTransDefaultDSPrimaryDomain expose the values of a transparent clock's default dataset (transparentClockDefaultDS). ptpbaseClockPortName, ptpbaseClockPortRole, ptpbaseClockPortSyncTwoStep, ptpbaseClockPortCurrentPeerAddressType, ptpbaseClockPortCurrentPeerAddress, and ptpbaseClockPortNumOfAssociatedPorts expose general information about a clock port. ptpbaseClockPortRunningName, ptpbaseClockPortRunningState, ptpbaseClockPortRunningRole, ptpbaseClockPortRunningInterfaceIndex, ptpbaseClockPortRunningTransport, ptpbaseClockPortRunningEncapsulationType, ptpbaseClockPortRunningTxMode, ptpbaseClockPortRunningRxMode, ptpbaseClockPortRunningPacketsReceived, and ptpbaseClockPortRunningPacketsSent expose a clock port's current running status. ptpbaseClockPortDSName, ptpbaseClockPortDSPortIdentity, ptpbaseClockPortDSlogAnnouncementInterval, ptpbaseClockPortDSAnnounceRctTimeout, ptpbaseClockPortDSlogSyncInterval, ptpbaseClockPortDSMinDelayReqInterval, ptpbaseClockPortDSPeerDelayReqInterval, ptpbaseClockPortDSDelayMech, ptpbaseClockPortDSPeerMeanPathDelay, ptpbaseClockPortDSGrantDuration, and ptpbaseClockPortDSPTPVersion expose the values of a clock port's port dataset (portDS). ptpbaseClockPortTransDSPortIdentity, ptpbaseClockPortTransDSlogMinPdelayReqInt, ptpbaseClockPortTransDSFaultyFlag, and ptpbaseClockPortTransDSPeerMeanPathDelay expose the values of a transparent clock port's port dataset (transparentClockPortDS). Shankarkumar, et al. Standards Track [Page 60]
RFC 8173 PTPv2 MIB June 2017 ptpbaseClockPortAssociateAddressType, ptpbaseClockPortAssociateAddress, ptpbaseClockPortAssociatePacketsSent, ptpbaseClockPortAssociatePacketsReceived, ptpbaseClockPortAssociateInErrors, and ptpbaseClockPortAssociateOutErrors expose information about a clock port's peer node. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example, by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET (read) the objects in this MIB module. Implementations SHOULD provide the security features described by the SNMPv3 framework (see [RFC3410]), and implementations claiming compliance to the SNMPv3 standard MUST include full support for authentication and privacy via the User-based Security Model (USM) [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations MAY also provide support for the Transport Security Model (TSM) [RFC5591] in combination with a secure transport such as SSH [RFC5592] or TLS/DTLS [RFC6353]. Further, deployment of SNMP versions prior to SNMPv3 is NOT recommended. Instead, it is recommended to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to those objects only to those principals (users) that have legitimate rights to access them. 6. IANA Considerations The MIB module defined in this document uses the following IANA- assigned OBJECT IDENTIFIER value recorded in the "Structure of Management Information (SMI) Numbers (MIB Module Registrations)" registry: Descriptor OBJECT IDENTIFIER value ---------- ----------------------- ptpbaseMIB { mib-2 241 } Shankarkumar, et al. Standards Track [Page 61]
RFC 8173 PTPv2 MIB June 2017 7. References 7.1. Normative References [IEEE-1588-2008] IEEE, "IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems", IEEE Std. 1588-2008, DOI 10.1109/IEEESTD.2008.4579760. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <http://www.rfc-editor.org/info/rfc2119>. [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, DOI 10.17487/RFC2578, April 1999, <http://www.rfc-editor.org/info/rfc2578>. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, DOI 10.17487/RFC2579, April 1999, <http://www.rfc-editor.org/info/rfc2579>. [RFC2580] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Conformance Statements for SMIv2", STD 58, RFC 2580, DOI 10.17487/RFC2580, April 1999, <http://www.rfc-editor.org/info/rfc2580>. [RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", STD 62, RFC 3414, DOI 10.17487/RFC3414, December 2002, <http://www.rfc-editor.org/info/rfc3414>. [RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model", RFC 3826, DOI 10.17487/RFC3826, June 2004, <http://www.rfc-editor.org/info/rfc3826>. [RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model for the Simple Network Management Protocol (SNMP)", STD 78, RFC 5591, DOI 10.17487/RFC5591, June 2009, <http://www.rfc-editor.org/info/rfc5591>. Shankarkumar, et al. Standards Track [Page 62]
RFC 8173 PTPv2 MIB June 2017 [RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure Shell Transport Model for the Simple Network Management Protocol (SNMP)", RFC 5592, DOI 10.17487/RFC5592, June 2009, <http://www.rfc-editor.org/info/rfc5592>. [RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)", STD 78, RFC 6353, DOI 10.17487/RFC6353, July 2011, <http://www.rfc-editor.org/info/rfc6353>. [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <http://www.rfc-editor.org/info/rfc8174>. 7.2. Informative References [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, DOI 10.17487/RFC3410, December 2002, <http://www.rfc-editor.org/info/rfc3410>. [RFC5905] Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch, "Network Time Protocol Version 4: Protocol and Algorithms Specification", RFC 5905, DOI 10.17487/RFC5905, June 2010, <http://www.rfc-editor.org/info/rfc5905>. [G.8265.1] ITU-T, "Precision time protocol telecom profile for frequency synchronization", ITU-T Recommendation G.8265.1, July 2014. Acknowledgements Thanks to John Linton and Danny Lee for their valuable comments and to Bert Wijnen, Kevin Gross, Alan Luchuk, Chris Elliot, Brian Haberman, and Dan Romascanu for their reviews of this MIB module. Shankarkumar, et al. Standards Track [Page 63]
RFC 8173 PTPv2 MIB June 2017
Authors' Addresses
Vinay Shankarkumar
Cisco Systems
7100-9 Kit Creek Road
Research Triangle Park, NC 27709
United States of America
Email: vinays@cisco.com
Laurent Montini
Cisco Systems
11, rue Camille Desmoulins
92782 Issy-les-Moulineaux
France
Email: lmontini@cisco.com
Tim Frost
Calnex Solutions Ltd.
Oracle Campus
Linlithgow
EH49 7LR
United Kingdom
Email: tim.frost@calnexsol.com
Greg Dowd
Microsemi Inc.
3870 North First Street
San Jose, CA 95134
United States of America
Email: greg.dowd@microsemi.com
Shankarkumar, et al. Standards Track [Page 64]
mirror server hosted at Truenetwork, Russian Federation.