/* vim: set sw=8 ts=8 si : */
/*************************************************************************
Title:    linuxfocus interactive lcd display
Author:   guido socher <guido(at)linuxfocus.org>
Copyright: GPL
**************************************************************************/

#include <io.h>
#include <progmem.h>
#include <interrupt.h>
#include <string-avr.h>
#include <stdlib.h>
#include "lcd.h"	/* these are the prototypes and defines for lcd.c */
#include "avr-util.h"
#include "uart.h"
#include "analog.h"
#include "hardwarewd.h"

static char uart_outbuf[UART_RX_BUFFER_SIZE+1];

#define reply_ok() uart_sendstr_P("ok\n")
#define reply_err() uart_sendstr_P("err\n")


/* should be twice the length of the banner string */
#define BANNERSCROLLEN 30
/* Input Push Buttons */
#define BUTTON0 PIND6
#define BUTTON0DDR DDRD
#define BUTTON0PIN PIND
#define BUTTON1 PIND3
#define BUTTON1DDR DDRD
#define BUTTON1PIN PIND
/* LED1=red */
#define LED1 PD5
#define LED1DDR DDRD
#define LED1PORT PORTD
/* LED0=green */
#define LED0 PC5
#define LED0DDR DDRC
#define LED0PORT PORTC
/* auto kick WD timeout */
#define AWDTOUT 20
int main(void)
{
	char *banner = PSTR ("linuxfocus.org");
	unsigned char i,j,banneron,rxresult,status,buttoninfo,autokickwd;
	int i16bit;
	unsigned int ignorebutton;
	char cmd;
	char *val;


	/* initialize watch dog/relai */
	autokickwd=0;
	wd_init();
	/* no messages about button press by default */
	buttoninfo=0;
	ignorebutton=0;
	/* initialize display, cursor off */
	lcd_init(LCD_DISP_ON);
	/* initialize LED as output */
	sbi(LED0DDR,LED0);
	sbi(LED1DDR,LED1);
	/* button as digital input */
	cbi(BUTTON0DDR,BUTTON0);
	cbi(BUTTON1DDR,BUTTON1);
	/* LEDs off */
	sbi(LED0PORT,LED0);
	sbi(LED1PORT,LED1);
	/* initialize rs232 */
	uart_init();
	banneron=1;
	sei(); /* enable interrupt */
	lcd_clrscr();


	while(1){
		rxresult=uart_getrxbufnl(uart_outbuf);
		if (banneron){
			/* display a scroll banner until we
			* get the first command */
			for (i=0;i<BANNERSCROLLEN;i++) {	
				lcd_clrscr();
				rolltext_lcd_p(banner,i);
				ignorebutton=65000; // delay but read input
				while(ignorebutton){
					rxresult=uart_getrxbufnl(uart_outbuf);
					ignorebutton--;
					if (rxresult){
						lcd_clrscr();
						ignorebutton=0;
						banneron=0;
						i=BANNERSCROLLEN;
					}
				}
			}
		}
		if (buttoninfo && ignorebutton==0){
			if (bit_is_clear(BUTTON0PIN,BUTTON0)){
				uart_sendchar('#');
				uart_sendchar('0');
				uart_sendchar('\n');
				ignorebutton=55000; // debounce, ignore button for a while
			}
			if (bit_is_clear(BUTTON1PIN,BUTTON1)){
				uart_sendchar('#');
				uart_sendchar('1');
				uart_sendchar('\n');
				ignorebutton=55000; // debounce, ignore button for a while
			}
		}
		if (ignorebutton) ignorebutton--;
		if (rxresult==0){
			continue;
		}
		/* valid command are: 
		* l=10 led 1 off
		* l=01 led 0 on
		* b=1 info messages for button press
		* d=someting write someting to display
		* D=someting clear then write someting to display
		* a=0 get analog value of ADC0
		* g=115 go to line 1 pos 15 on the lcd
		* c=c command clear display
		* c=h command home
		* c=r one right
		* c=l one left
		* c=b blink cursor
		* c=n normal cursor
		* w=1 enable watch dog
		* w=2 enable watch dog, any d= or D= command will kick the wd
		* w=0 disable watch dog
		* w=? show whether wd is on or off, or if there
		*     was a timeout (3)
		* w=s get current time out
		* s=1-255 set watchdog timeout to multiple of 16sec
		* you must set s periodically. It will decrement.
		* */
		/* now parse the comands and act on them */
		if (strlen(uart_outbuf) < 3) {
			reply_err();
			continue;
		}
		if (uart_outbuf[1] != '='){
			reply_err();
			continue;
		}
		val=&(uart_outbuf[2]);
		cmd=uart_outbuf[0];
		status=0;
		/* act on the commands */
		if (cmd=='l'){
			/* change LEDs */
			i16bit=atoi(val);
			switch (i16bit){
				case 0:
					sbi(LED0PORT,LED0); /* off */
					status=1;
					break;
				case 10: 
					sbi(LED1PORT,LED1); /* off */
					status=1;
					break;
				case 1:
					cbi(LED0PORT,LED0); /* on */
					status=1;
					break;
				case 11:
					cbi(LED1PORT,LED1); /* on */
					status=1;
					break;
			}
		}
		if (cmd=='D'){
			if (autokickwd) wd_settime(AWDTOUT);
			lcd_clrscr();
			/* display string */
			lcd_puts(val);
			status=1;
		}
		if (cmd=='d'){
			if (autokickwd) wd_settime(AWDTOUT);
			/* display string */
			lcd_puts(val);
			status=1;
		}
		if (cmd=='g'){
			i=*val;
			if (i < '5' && i >= '0'){
				i=*val - '0'; // convert to integer;
			}
			j=(unsigned char)atoi((val+1));
			lcd_gotoxy(j,i);
			status=1;
		}
		if (cmd=='c'){
			switch (*val){
				case 'h':
					lcd_home();
					status=1;
					break;
				case 'c':
					lcd_clrscr();
					status=1;
					break;
				case 'l':
					/* one left */
					lcd_command(LCD_MOVE_CURSOR_LEFT);
					status=1;
					break;
				case 'r':
					/* one right */
					lcd_command(LCD_MOVE_CURSOR_RIGHT);
					status=1;
					break;
				case 'n':
					/* normal dispaly (no blink) */
					lcd_command(LCD_DISP_ON);
					status=1;
					break;
				case 'b':
					/* blink at next entry */
					lcd_command(LCD_DISP_ON_BLINK);
					status=1;
					break;
			}
		}
		if (cmd=='a'){
			/* start analog conversion for given ADC pin */
			i=(unsigned char)atoi(val);
			i16bit=convertanalog(i);
			/* display the result value e.g a0:123 */
			uart_sendchar('a');
			uart_sendchar(*val);
			uart_sendchar(':');
			itoa(i16bit,uart_outbuf,10);
			uart_sendstr(uart_outbuf);
			uart_sendchar('\n');
			status=2;
		}
		if (cmd=='s'){
			i=(unsigned char)atoi(val);
			wd_settime(i);
			status=1;
		}
		if (cmd=='b'){
			switch (*val){
				case '0':
					buttoninfo=0;
					status=1;
					break;
				case '?':
					uart_sendchar('b');
					uart_sendchar(':');
					i=buttoninfo + '0';
					uart_sendchar(i);
					uart_sendchar('\n');
					status=2;
					break;
				case '1':
					buttoninfo=1;
					status=1;
					break;
			}
		}
		if (cmd=='w'){
			switch (*val){
				case '?':
					i=wd_status();
					if (i==2) i=3;
				        if (i==1 && autokickwd==1){
						i=2;
					}
					i=i + '0';
					uart_sendchar('w');
					uart_sendchar(':');
					uart_sendchar(i);
					uart_sendchar('\n');
					status=2;
					break;
				case 's':
					wd_gettime(&i);
					uart_sendchar('s');
					uart_sendchar(':');
					itoa(i,uart_outbuf,10);
					uart_sendstr(uart_outbuf);
					uart_sendchar('\n');
					status=2;
					break;
				case '1':
					wd_start();
					autokickwd=0;
					status=1;
					break;
				case '2':
					wd_settime(AWDTOUT);
					wd_start();
					autokickwd=1;
					status=1;
					break;
				case '0':
					wd_stop();
					autokickwd=0;
					status=1;
					break;
			}
		}
		/* command handling done. now return status */
		if (status==1){
			reply_ok();
		}
		if (status==0){
			reply_err();
		}
	}

}

mirror server hosted at Truenetwork, Russian Federation.