Home Map Index Search News Archives Links About LF
[Top bar]
[Bottom bar]
[Photo de l'auteur]
by Yves Ceccone

About the author:

Photographer by trade, converted to computer graphics, and hasn't let go of the mouse since.


Content:

Sketch, vectorial drawing under Linux

[Illustration]

Abstract:

Sketch is a vector drawing program, which is to say it represents a figure, a circle for example, by a mathematical formula, whereas a program such as The Gimp, a bitmap editor, uses points (pixels). The advantages of a vectorial representation over a bitmap are that files will be smaller and the drawing can be enlarged significantly without differences in rendering (pixellisation) like those you can get with a bitmap image. You cannot represent a photo in vector mode, but it is possible to integrate bitmap images within Sketch (eps, jpg, gif, tiff, ...) and import and open other formats (xfig, illustrator, corel, ...). Without difficulty, I've opened and modified drawings created with Illustrator 6 on a Mac and Illustrator 7 on a PC. Sketch can also save in Illustrator format (.ai). This article reviews the principle tools of Sketch, details the creation of a drawing of a floppy disk, and explains some "special" effects worthy of the big shots of vector drawing.



 

Installation


On the Sketch site, you can find the source and also the precompiled binaries and necessary libraries as RPMs. (I was not able to compile the program, and apparently I am not alone ;-)). The version used in this article is 0.6.2, with RedHat 6.0.
You can also down-load the version used for this article directly from here:

Redhat 6.0 comes with python 1.5.1. You need to install the imaging library and the sketch rpm:
sketch-0.6.2-1.i386.rpm
python-imaging-rh-1.0b1-3.i386.rpm

Suse 6.1 comes with python 1.5.1. You need to install the imaging library and the sketch rpm:
sketch-0.6.2-1.i386.rpm
python-imaging-suse-1.0b1-1.i386.rpm

Debian 2.1 You need to have python-base (>= 1.5.2), the imaging library and the sketch rpm:
sketch_0.6.2-1.deb
python-imaging_1.0.1-0pre2.deb

 

Principle tools



 

Floating palettes

These palettes appear with keyboard shortcuts or through commands in the menu, for the most part in "Windows"




Fill Style : You can fill a figure with a uniform background, a gradient (linear or circular), crosshatches, a pattern (image file), or nothing.





Line Style : To choose the colour of the line, its thickness, and the sharpness of its corners and its ends.





Align : Align one or more objects relative to each other (by edge, top or centre), to the page, or to a selection.




Blend : After selecting two objects of different shape and colour, create a "gradient" from one to the other, choosing the number of intermediate steps.





Curve : Add a point, remove one, cut a curve in two, change a tangent ...





Font selector






Grid : Modify the grid.
This can be made into a snap-to grid.





Layers : Layers ease the creation of complex drawings, since you can block changes to a layer, go into drawing mode, change a layer object, reorder the layers, ...
Grids and guides are also controlled with this palette.




Page layout





Regular polygons





Styles : Create a style (colour, line width ...) and apply it to many objects without the need to apply all the changes with the individual tools.




Colour selection



 

Floppy Disk




The jagged contours that you see, particularly the circular parts, are an artifact of the screen. This effect diminishes when you zoom and disappears completely on printing. You can download the floppy disk in sketch format here, if that helps.

When you start Sketch, it creates an empty document (in A4) by default.
"F5" opens the Layer palette, and to make the grid appear you must ensure that the eye beside "Grid" is open.
Modify the width of the grid :




The body

Set the grid as "snap-to", then draw a square about the size of the page with the rectangle drawing tool (while pressing "ctrl" for squareness), starting on one point of the grid and finishing on another.
After zooming on the top left corner, click with the edit tool on the point in the corner and pull inward to round all four corners at the same time :



Still in the same corner, add guide lines 5 units from the corner both horizontally and vertically (by "dragging" the respective rulers):



Next, lock the layer "Guide Lines" (with the padlock)
Convert the line to a Bézier curve using the menu Curves -> Convert to Curve
Open the palette Windows -> Curves Commands
With the edit tool, click on one of the guide-line/rectangle intersections and a point will appear. Now click on the "Cut Curves" tool on the top right of the Curve palette.
Do the same for the other intersection
Then use Curves -> Split Béziers to separate the two parts, and select (with the selection tool) the piece with the corner and delete it.
You could join the loose ends, but in this case it isn't useful.




With the "Insert Nodes" tool (in the centre of the Curve palette) add 3 points to the line.




With the edit tool you can move these points, and with the aid of the snap-to grid for the horizontal and vertical, you can easily make the outline you need.




... The floppy disk outline is now finished ...

Open the "Fill style" and "Line style" palettes
With the outline of the floppy disk selected, click on "None" in the "Line style" palette to remove any thickness from the outline.



In "Fill style" click in the first column with the third button (gradient) then on the third gradient type (circular), then on Edit Gradient. You can also set the colours for the gradient with the two buttons under the gradient types.
In the Edit Gradient dialog box you can modify the color of a point on the gradient, add a new point, and of course move the points.
With a circular gradient, you can choose the center of the gradient with the mouse.
Once you have created your gradient and selected the figure to which you want to apply it, click "Apply" :



You can now lock the layer "Body" and create another with the icon on the bottom right of "Layers"
This layer is destined for the center of the floppy disk.
By default a newly created layer is placed above the others; you can modify the level of a layer with the arrows on the bottom of the "Layers" palette.


The axis



Draw a circle at the center of the floppy disk body (use the "alignment" box to centre it) and fill it with black.
Duplicate this circle and fill it with a very light gray and place it under the first using the "place underneath" icon in the tool palette.
To give the effect of light from the left, you must shift the light circle to the right, deforming it a little by pulling on the little squares around it while it is selected.




Duplicate the black circle again then shrink it using the mouse with "ctrl" key pressed (to keep its shape).
Fill it with a linear gradient going from a light gray to a dark gray, duplicate it and place it underneath filled with white, shifted and elongated on the left.




For the two little cutouts use rectangles with rounded corners (same method as for the body), filling one with black and the other with a gradient, and add the reflections which give them volume.


Slider
You can of course create a new layer for this part ...



The metal slider consists of a rectangle with rounded corners on the bottom only, made by cutting off the top half of the figure, like you saw above with the "Cut curve" tool in the Curve palette.
To give a metallic effect, fill the object with a circular gradient light gray/dark gray shifting the centre of the gradient to the left.




To give the effect of the cutout in the slider you must use the same gray as in the body to fill the rectangles on this part.
And of course add a "sliver of light" by duplicating these elements and placing them under the original after having filled them with light gray / white.




Make a copy of the slider that you will transform to create the indentation and its lighting effects, then make the slot with a black rectangle.




The other elements are made from half circles, deformed circles and rectangles with rounded corners.
A half circle is easily made by selecting a circle in edit mode and moving the lone point which appears.


Bottom and the text



Use the same method for the other elements, rectangles, circles ...
For the text, click with the text tool where you want to place it, in the text palette, choose the typeface, the style, and the colour. The area around the text is a rectangle with rounded corners.
The vertical text on the right hand side is made by going to the menu edit -> create -> LCD text : You must enter the text, the style, "Apply", you may also change the size, the colour, ..., and to rotate it to 90° double-click on the object which brings up arrows that allow rotation. Use the arrows in the corners here, as the others serve to deform the object.



 

Sunset




A contribution from André Pascual. You can clearly see the structure of the drawing in the Layers palette [and even more clearly if you recognize that feuilles=leaves, speculaire=specular reflection, tronc=trunk, nuages=clouds, soleil=sun, ciel=sky].



 

Volume effects / Blend




This effect is realized with the blend tool (effect -> blend), which I think of as a shape gradient.
Principle: you can clearly see on the right that the square is transformed to a circle step by step and that its colour is also modified with each step.



Select two objects, then you choose the number of steps for the blend. The more steps you choose, the more smooth and realistic the effect. With 200 steps, you can create the semblance of a sphere from a large coloured circle and a very small white circle above it.
For the example above, I used 3 "blend" effects together (6 objects, 2 by 2). Blend only works with two objects, and the result cannot be combined with another "blend" or an object. But it is possible to modify it by selecting certain parts, to change the steps or the colour.



 

Text following a curve




For this effect it suffices to select a figure and some text and use the menu Effects -> create path text.
The text will automatically follow the curve, no matter what its shape.



 

Vectorized text




Vectorizing text (here a "y" in the symbol font) transforms it into an object, that is, a vectorized curve modifiable by pulling on its points and with the help of the "Curves" dialog box.
For that you must, once you have the text selected, use the menu Curve -> Convert to Curves, and then to make it editable, ungroup it with Arrange -> Ungroup.
This can be useful if you must provide a drawing to someone who does not have the fonts you've used on their machine; you vectorize the text and that person will be able to open the drawing without problem.
To be able to vectorize a font, Sketch must find the corresponding font file .pfb, for that I put this file in the directory /usr/lib/sketch-0.6.2/Ressources/Fontmetrics.



 

Import / Mask




With the menu Edit -> Create -> Load image (or the last icon on the right in the menu), you can import a bitmap image.
It is possible to resize the image.




With the menu File -> Insert Document, you can insert in a drawing a file from Sketch, Corel, Svg, ... or illustrator as is the case in this example.





The cropping was done with the menu Effects -> Create Mask Group on a rectangle defined in the original image.



 

What's to come


We often compare Gimp to photoshop (it compares favourably), and I can't help thinking that Sketch will be the Gimp of drawing programs, and that it will be the equal of Illustrator, Freehand, or Corel Draw... eventually.
Webpages maintained by the LinuxFocus Editor team
© Yves Ceccone
LinuxFocus 1999
Translation information:
fr -> -- Yves Ceccone
fr -> en Paul Kienzle

1999-11-01, generated by lfparser version 0.8

mirror server hosted at Truenetwork, Russian Federation.