Next Previous Contents

3. Setup

3.1 Setting Up a Virtual Domain

The following steps are necessary to set up a virtual domain with vmailmgr (assuming vmailmgr has been compiled and installed). As an example, we'll set up a virtual user `me@mydomain.org`, with aliases of `myself@mydomain.org` and `myname@mydomain.org`.

  1. Set up a DNS entry for the domain. I won't cover this here, as it is dependant on far too many other things. I will mention that to make IP based virtual domains work a PTR record which matches an entry in virtualdomains is nessesary, for example, if nslookup 10.56.33.122 returns mail.mydomain.com, `virtualdomains` needs an entry like `mail.mydomain.com:myuser`

    For the example, we'll assume that the mail exchanger for mydomain.org is already set up to point to your computer.

  2. Set up a base user for the domain. Create a user, with a name of your choosing. Since the maildirs for all the users in the virtual domain will be stored under this user's home directory, make sure you set the user up in a partition or disk that is appropriate for such storage. The tools that you should use to accomplish this step vary greatly between different systems. For our example, I'll add a user `myuser`.
  3. Configure qmail to recognize the domain. To do this, you need to modify two of qmail's configuration files in `/var/qmail/control` `rcpthosts` and `virtualdomains`. If you wish to have mail to `anything.mydomain.org` be delivered in the same way, add the following
  4. Configure qmail-popup/qmail-pop3d to use `checkvpw` as the password checker. This step is dependant on how you have installed qmail.
  5. Add users or aliases to the domain. Either change user to the user you just created (for example, type `su - myuser`) or log in (with either telnet or at the console) as the new user, and use the included programs to add users and aliases.

    For our example, we would

After you have completed all these steps, you will need to kill and restart `qmail-send` to make it read the new `virtualdomains` table.

If you are using `inetd` to launch `qmail-popup`, `kill -HUP` the `inetd` process as well.

3.2 Using one IP address for mutiple domains

Logging in as a virtual user?

There are two ways to log in without using multiple IP addresses.

  1. The first way is to log in as `userSEPvirtual.domain.org`, where `user` is the mailbox name of the virtual user, SEP is one of `@` or `:` (by default, this is configurable in the `/etc/vmailmgr/' directory), and `virtual.domain.org' is the virtual domain's name, as listed in `/var/qmail/control/virtualdomains'.
  2. The second way is to use the internal form of the mailbox name -- that is, `baseuser-user', where `user' is the same as above, and `baseuser' is the username of the managing user.
Example: `/var/qmail/control/virtualdomains' contains
  testdomain.org:testuser
User `myuser' exists, and has set up a virtual mailbox with the name `me'. The `separators' variable in `/etc/vmailmgr/' contains `@:'. This virtual user could log in as `me@mydomain.com', `me:mydomain.cm', or `myuser-me'.

3.3 Catch all misdirected mail?

In the `vmailmgr/' configuration directory, there is an entry called `default-username'. If mail to a virtual domain does not match any users or aliases in that domain, it is delivered to the name listed in this configuration item if it exists (which defaults to `+'). To make this deliver to you, simply type:

  vaddalias me +

3.4 Setup VMailMgr IMAP support?

VMailMgr supports Courier-IMAP, but Courier-IMAP does not auto detect VMailMgr. This means that some minor work is required for making the two work together.


Next Previous Contents

mirror server hosted at Truenetwork, Russian Federation.