Next Previous Contents

18. Installing from a DOS partition

You can use this section if you already have a DOS partition on your target computer. I think it is a faster installation method.

Read the section 5.3.1 "Installing from a DOS partition" from install.txt. This section is also available on the Debian CD in the html file ch-install-methods.html.

I am just going to help you to make the first point : "1. Get the following files from your nearest Debian repository"

The transfer is easy with the floppy-disc based Linux from  tomsrtbt.

Export the source cdrom drive via nfs.

Read the file tomsrtbt.FAQ

Create the floppy under DOS or Linux, you have the choice.

     Linux installation:
     a) extract the .tar.gz archive
     b) Be root
     c) Be in the tomsrtbt-<version> directory
     d) Have a blank floppy with no bad sectors
     e) Do './install.s'
     

Boot the target with the floppy. Login as root.

      $ insmod plip
      $ ifconfig plip1 192.168.0.1 pointopoint 192.168.0.2 \
      netmask 255.255.255.255 up
      $ route add -host 192.168.0.2 dev plip1
      $ mount -t nfs 192.168.0.2:/cdrom /cdrom
      $ mkdir /c
      $ mount -t msdos /dev/hda1 /c
      $ mkdir /c/debian
      $ cd /cdrom/dists/stable/main/disks-i386/current/
      $ cp resc1440.bin drv1440.bin base2_1.tgz root.bin linux \
      install.bat loadlin.exe /c/debian
     

The \ means the command line continues on the next line. The cp command takes some time. When finished, remove the floppy and then :

      $ reboot
     

Boot under DOS.

      C:\> cd debian
      C:\DEBIAN> install
     

Now you start to install Debian from a DOS partition. You do not need plip or floppy during the installation process. Everything deals with the hard drive. Read the Debian install documentation, it is very good and clear.


Next Previous Contents

mirror server hosted at Truenetwork, Russian Federation.