The inner() function in the stokes package

Robin K. S. Hankin

inner
function (M) 
{
    ktensor(spray(expand.grid(seq_len(nrow(M)), seq_len(ncol(M))), 
        c(M)))
}

To cite the stokes package in publications, please use Hankin (2022b). Spivak (1965), in a memorable passage, states:

The reader is already familiar with certain tensors, aside from members of \(V^*\). The first example is the inner product \(\left\langle{,}\right\rangle\in{\mathcal J}^2(\mathbb{R}^n)\). On the grounds that any good mathematical commodity is worth generalizing, we define an inner product on \(V\) to be a 2-tensor \(T\) such that \(T\) is symmetric, that is \(T(v,w)=T(w,v)\) for \(v,w\in V\) and such that \(T\) is positive-definite, that is, \(T(v,v) > 0\) if \(v\neq 0\). We distinguish \(\left\langle{,}\right\rangle\) as the usual inner product on \(\mathbb{R}^n\).

- Michael Spivak, 1969 (Calculus on Manifolds, Perseus books). Page 77

Function inner() returns the inner product corresponding to a matrix \(M\). Spivak’s definition requires \(M\) to be positive-definite, but that is not necessary in the package. The inner product of two vectors \(\mathbf{x}\) and \(\mathbf{y}\) is usually written \(\left\langle\mathbf{x},\mathbf{y}\right\rangle\) or \(\mathbf{x}\cdot\mathbf{y}\), but the most general form would be \(\mathbf{x}^TM\mathbf{y}\). Noting that inner products are multilinear, that is \(\left\langle\mathbf{x},a\mathbf{y}+b\mathbf{z}\right\rangle=a\left\langle\mathbf{x},\mathbf{y}\right\rangle + b\left\langle\mathbf{x},\mathbf{z}\right\rangle\) and \(\left\langle a\mathbf{x} + b\mathbf{y},\mathbf{z}\right\rangle=a\left\langle\mathbf{x},\mathbf{z}\right\rangle + b\left\langle\mathbf{y},\mathbf{z}\right\rangle\) we see that the inner product is indeed a multilinear map, that is, a tensor.

We can start with the simplest inner product, the identity matrix:

inner(diag(7))
## A linear map from V^2 to R with V=R^7:
##          val
##  6 6  =    1
##  7 7  =    1
##  5 5  =    1
##  3 3  =    1
##  2 2  =    1
##  4 4  =    1
##  1 1  =    1

Note how the rows of the tensor appear in arbitrary order, as per disordR dicipline (Hankin 2022a). Verify:

x <- rnorm(7)
y <- rnorm(7)
V <- cbind(x,y)
LHS <- sum(x*y)
RHS <- as.function(inner(diag(7)))(V)
c(LHS=LHS,RHS=RHS,diff=LHS-RHS)
##      LHS      RHS     diff 
## 5.503805 5.503805 0.000000

Above, we see agreement between \(\mathbf{x}\cdot\mathbf{y}\) calculated directly [LHS] and using inner() [RHS]. A more stringent test would be to use a general matrix:

M <- matrix(rnorm(49),7,7)
f <- as.function(inner(M))
LHS <- quad3.form(M,x,y)
RHS <- f(V)
c(LHS=LHS,RHS=RHS,diff=LHS-RHS)
##           LHS           RHS          diff 
## -3.410660e+00 -3.410660e+00  4.440892e-16

(function quadform::quad3.form() evaluates matrix products efficiently; quad3.form(M,x,y) returns \(x^TMy\)). Above we see agreement, to within numerical precision, of the dot product calculated two different ways: LHS uses quad3.form() and RHS uses inner(). Of course, we would expect inner() to be a homomorphism:

M1 <- matrix(rnorm(49),7,7)
M2 <- matrix(rnorm(49),7,7)
g <- as.function(inner(M1+M2))
LHS <- quad3.form(M1+M2,x,y)
RHS <- g(V)
c(LHS=LHS,RHS=RHS,diff=LHS-RHS)
##           LHS           RHS          diff 
## -5.418253e+00 -5.418253e+00  1.776357e-15

Above we see numerical verification of the fact that \(I(M_1+M_2)=I(M_1)+I(M_2)\), by evaluation at \(\mathbf{x},\mathbf{y}\), again with LHS using direct matrix algebra and RHS using inner(). Now, if the matrix is symmetric the corresponding inner product should also be symmetric:

h <- as.function(inner(M1 + t(M1))) # send inner() a symmetric matrix
LHS <- h(V)
RHS <- h(V[,2:1])
c(LHS=LHS,RHS=RHS,diff=LHS-RHS)
##       LHS       RHS      diff 
## -22.52436 -22.52436   0.00000

Above we see that \(\mathbf{x}^TM\mathbf{y} = \mathbf{y}^TM\mathbf{x}\). Further, a positive-definite matrix should return a positive quadratic form:

M3 <- crossprod(matrix(rnorm(56),8,7))  # 7x7 pos-def matrix
as.function(inner(M3))(kronecker(rnorm(7),t(c(1,1))))>0  # should be TRUE
## [1] TRUE

Above we see the second line evaluating \(\mathbf{x}^TM\mathbf{x}\) with \(M\) positive-definite, and correctly returning a non-negative value.

Alternating forms

The inner product on an antisymmetric matrix should be alternating:

jj <- matrix(rpois(49,lambda=3.2),7,7)
M <- jj-t(jj) # M is antisymmetric
f <- as.function(inner(M))
LHS <- f(V)
RHS <- -f(V[,2:1])   # NB negative as we are checking for an alternating form
c(LHS=LHS,RHS=RHS,diff=LHS-RHS) 
##      LHS      RHS     diff 
## 19.50013 19.50013  0.00000

Above we see that \(\mathbf{x}^TM\mathbf{y} = -\mathbf{y}^TM\mathbf{x}\) where \(M\) is antisymmetric.

References

Hankin, R. K. S. 2022a. “Disordered Vectors in R: Introducing the disordR Package.” https://arxiv.org/abs/2210.03856; arXiv. https://doi.org/10.48550/ARXIV.2210.03856.
———. 2022b. “Stokes’s Theorem in R.” arXiv. https://doi.org/10.48550/ARXIV.2210.17008.
Spivak, M. 1965. Calculus on Manifolds. Addison-Wesley.

mirror server hosted at Truenetwork, Russian Federation.